Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing Cypress Driftwood

Featured Replies

I was hoping someone could give me some advice on finishing cypress driftwood. I have very little experience with finishing.  I sand starting with 80 grit and finish with 400.  I use Howard’s wood conditioner and finish with PPG penetrating oil (natural) intended for decks.  I have been fairly happy with the results but I am looking for a way to “pop” the grain.  I have seen the video where you pop the grain on the pencil holder.  Would that be effective with cypress?  Is there any way I could get similar results with the PPG penetrating oil I am currently using?  Any tips would be greatly appreciated.  Thank you.

By "pop", do you mean to enhance the contrast between early and late growth rings, or to emphasize some form of wavy figure in the wood?

"Popping" figured grain often involves application of a dye, followed by sanding. The dye penetrates deeper where the curly grain fibers enter and exit the surface. The flat fibers don't absorb so much, so sanding removes the dye from those areas, increasing the contrast.

The only method I know to increase contrast between early and late growth is to lightly scorch the surface. This works on some softwoods, notably yellow pine. Maybe not so well on cypress.

Try lightly scorching a inconspicuous area then hit it with a wire brush going with the grain. If it's old growth cypress with closely spaced growth rings it should work pretty well. It it's young fast growth cypress all the late wood is probably too soft to differentiate.

That deck finish contains pigments, which tend to muddy the grain. If you want to color the wood, dye will do a better job of allowing the grain to show. On highly figured grain, a coat of oil, such as BLO, Danish oil, Tung oil under poly etc can bring out the grain more than just poly. I've done side by side testing of this theory & can report that it does make a difference.

  • Author

Thank you all for the feedback.  These are all pieces of cypress driftwood that I collect from the river.  I have very little experience finishing and the benefit of the penetrating oil I’m using is that I only have to use one coat.  The pieces are all odd sized and I don’t have a professional shop I’m working in.  I feel the grain of the wood is really interesting and I want to accentuate it.  Most of the pieces I work on are cypress knees so I believe the wood should be fairly old.  Once again thanks for the feedback!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.