Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Spraying Water Based General Finishes on Cuckoo Clock Cases

Featured Replies

Hi Everyone,

We use GF Water Based Wood stain and High Performance Top Coat to finish the cases for my clocks.

We've dipped our toes into spraying using a cheap air brush. That showed us that it is most definitely the direction to go. The boxes have channels for the back door. Spraying gets just the right amount of finish in there. And what an improvement in the appearance! So, $19 well-spent. Now to move on -- up.

With the syphon feed we didn't get a nice consistent spray. It seems a gravity feed would let the stain or top coat run through on its own giving better results.  We figure we need about a 3/4" spray. 

Any suggestions for a spray system that will meet our needs?

Thanks!

Jodie

 

 

 

I've got a little HVLP spray gun for touch ups. Techline Jr . It also as tips to apply glazes. Needs 3 cfm at around 10-15 psi , so it runs on a regular compressor. I spray stains and finishes with it. 

Its made by CA Technologies.

Iwata LPH80 would be the ideal gun to do what you want, but they're about $300.  They don't take much air, but you need a consistent, dry flow of air, so not the tiniest compressor.

My little gun / kit was $250. I use a second water separator and a 25 ft hose between the compressor laying on a cool concrete floor. So 2 hoses and a water separator on the compressor plus the second one after the air has a chance to cool is sufficient for a dry supply of air for spraying in my small shop. 

The majority of the finish I spray is waterbourne using a Turbine supplied HVLP siphon type gun. The quart cup is pressurized by a small hose from the airstream that constantly goes through a turbine/HVLP gun. 

Jodie, welcome to the forum. Would really like to see some of your clocks. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.