mn pete Posted February 13, 2011 Report Share Posted February 13, 2011 It was a nice and toasty 33 degrees here in the Twin Cities, so I found myself back out in the shop! http://secondwindworkshop.blogspot.com/2011/02/groovin-on-saturday-afternoon.html It's so much nicer working in the shop when you can't see your breath and your fingers don't go numb! Quote Link to comment Share on other sites More sharing options...
MTR Posted February 14, 2011 Report Share Posted February 14, 2011 Nice stack of parts ya got there! Do you have any issues with the leopardwood/lacewood/ silky oak? I have/had a really bad reaction too it in the past and spent weeks trying to figure out just what the heck was causing it. Just an FYI to watch out for it. Quote Link to comment Share on other sites More sharing options...
mn pete Posted February 15, 2011 Author Report Share Posted February 15, 2011 Thanks Rob! No reactions to the Lacewood here. I did some sanding on the bottoms and the inside surfaces of the side pieces on Sunday. I've got to be better about wearing a dust mask! So far nothing has given me any issues though. Quote Link to comment Share on other sites More sharing options...
mn pete Posted February 16, 2011 Author Report Share Posted February 16, 2011 Even more work done...sanding and some layout on those fancy Padauk pieces. http://secondwindworkshop.blogspot.com/2011/02/just-warming-up.html Quote Link to comment Share on other sites More sharing options...
mn pete Posted March 6, 2011 Author Report Share Posted March 6, 2011 This week I built a slot cutting jig for box corners, and today I made it back out into the shop and got some cutting done. I'm adding the corner splines to about 2/3 of the latest run of boxes. Check it out... http://secondwindworkshop.blogspot.com/2011/03/gettin-jiggy-with-it.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.