Recommended Posts

Posted

My brother also has a 735 and called with a problem in that the feed rollers quit working. He removed the top and end covers to reveal the drive gears and chain. He said the front gear which is run off the motor had sheared the shear pin/key way. He found one locally for a couple of bucks, replaced it and it sheared again. He bought two more and when assembling it, he realized that the rear roller shaft had seized up and as it was driven by the front gear, was the root of the problem. Has anyone experienced this problem? 

Posted

I have never seen that - did a few quick searches and could not find anything like it either.  I have the 735 and have never noticed a problem with the rollers...

 

Posted

We’re thinking bearing as well. He is working on a cabinet build for a client and was runnng his last board thru at low speed when it broke. He’s contemplating having it rebuilt or just buying a new one. 

Posted

The price has come down on these where if you wait for a sale, you can get the unit, in/outfeed tables, the mobile case/cart and an extra set of blades for around $650. If it were me, I'd hold onto the old one for spare parts. 

Good luck.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 63 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined