Tobbe Arnesson Posted June 13, 2011 Report Posted June 13, 2011 Hi there! I "accidentally" bought a house that came with an old wood workshop, trying to figure out some basic skills in this new hobby. I've always been drawn to tinkering and making stuff and wood has often been a preferred choice. In my quest to learn more I ended up here... Some photos; The "machine" room of the wood shop. Jointer, vertical router (that has old square cutters that I don't intend to ever use - I use it as a drum sander at the moment), lathe, band saw, home made table saw that really need an "shark fin" (I seem to lack some terms in English) and to the far right an old planer with another leathal square cutter - this one still belt driven (see the ceiling). Looking out the windows I can see water running by, pretty neat! The spring flood makes it kinda noisy and the air quite humid but there's something soothing with running water. Here's me close to midnight sitting and feeling quite pleased with the progress on the current project. And here's the current project, a table for the garden. A sofa and three chairs will follow. Getting some time in the shop also gives time to reflect on things to improve, such as some form of dust evac system (plans pretty completed in my mind). (to the left is the belt driven planer and here you can also see the old drill press {that can use those square chisel-thingies I lack an English word for}) And here's two previous projects I've done in the shop (mostly playing around with the camera): DVD-cases: Shelves for a server rack: I'm gonna hang around and try to catch the tone of this forum, but so far it seems like a good place to be! With best regards from Sweden. Quote
Vic Posted June 13, 2011 Report Posted June 13, 2011 Wow..nice space and love that bandsaw. The the you referred to at a Shark Fin is either a splitter or a riving knife. Quote
Dave H Posted June 13, 2011 Report Posted June 13, 2011 Wow that is a great shop, is it still hydro powered or was it converted to electric. Thanks for the shop tour some really great machines you have there. Quote
Tobbe Arnesson Posted June 13, 2011 Author Report Posted June 13, 2011 Vic: Yeah that band saw is a big mean one, seems to work great too! I'm thinking about replacing the woodblock side supports for the blade and the rear support disc with some ball bearings at some point. Will look at modern saws and draw some ideas. Perhaps I should check the band speed at some point and perhaps gear it differently. Thanks for the English terms, the regular on-line translators don't seem to handle these technical terms very well. Direct translation from Swedish would be "splitting-knife" so it seems pretty close in this case! higtron: The main function of the building used to be a flour-mill, the first building was probably built in 1627. The current building was made in 1854 but the wood shop is two later additions, don't know when but there are no traces of hydro-power left in that part. The flour-mill was converted to electric power in the 1930:ies when a hydro power plant was constructed on the other side of the stream. The flour-mill shut down in 1974. Only the planer and a pretty big grinding stone are still hooked to the ceiling belt drive, all other machines have been rebuilt with separate electric motors. The big motor for the belt drive system is still there but I have not worked up the guts to hit the switch for it yet, who knows what condition the wiring is in? On the other side of the flour-mill is a saw mill that I managed to start up and tried on a couple of European Ash-trees (Fraxinus excelsior) last year: Have to get my hands on some lumber... Quote
Onboard Posted June 13, 2011 Report Posted June 13, 2011 Tobbe, that’s an amazing woodshop. I love the wood floors. Nice job on the videos. I’m glad to see you were wearing a dust mask. I saw a lot of sawdust flying around. The picture showing the drill press shows a large quantity of suspended sawdust particles. Are you planning on adding some sort of dust collection / air filtration in the future? Do you know what kind of wood your bandsaw guide blocks are made of? Normally it would be lignum vitae. If they’re not lignum vitae then you could replace them with LV (not Lee Valley ). LV should resist wear for many years and has a natural lubricant. Here are a couple of sources if you’re interested: Source #1; Source #2. As far as the rear blade support, I agree that a standard thrust bearing would be nice. You mentioned a “shark fin”. You may have been thinking of the Shark Splitter from the LeeWay Workshop. He sells splitters, riving knives and saw blade guards for specific models of table saws. My guess is that he wouldn’t have one for your table saw model, but you might be able to adapt one of his splitters for your table saw. You could contact him and discuss the matter. That’s one awesome sawmill! "I "accidentally" bought a house that came with an old wood workshop..."???? Quote
Tobbe Arnesson Posted June 14, 2011 Author Report Posted June 14, 2011 Thanks Onboard! Yeah I use the dust mask, I will put in an powerful dust extractor that wents outside of the shop with properly sized plumbing. Thanks for the tips on the guide blocks, I have no idea what wood they're made of. I was planning to make some upgrades to the table saw (including fitting a but have since decided to scrap the whole thing and get a proper one. The home built one I have can not rise/lower or angle the saw blade. I called it a shark fin since I did not know the English word for it, it kinda resembles a shark fin. I was thinking about making my own, especially since I found this image (it's from a sign): The text translates to: "Choose a riving knife that is 0.2 mm thicker then the saw blade measured at the bottom of a tooth." Regarding the accident with house purchase I was kinda joking, but I stumbled on the house and instantly fell in love with it. That it also came with a wood shop did not hurt at all! Quote
Chris Adkins Posted June 22, 2011 Report Posted June 22, 2011 What a great looking shop! I love the wood floors, makes you feel like the old days. Quote
Tobbe Arnesson Posted June 22, 2011 Author Report Posted June 22, 2011 I've been looking at some old photos and it seems the old part of the shop was built sometime between 1920 and 1925, so it should feel like the old days. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.