R Jones Posted July 14, 2011 Report Posted July 14, 2011 Just a little test I did in the shop today. Had a couple extra minutes and have been wanting to try and inlay some copper so.... Here's a piece of 0.02" copper inlayed into a piece of Bubinga. It's about 3 3/4" round and 3/4" thick. I was going to use it as a drink coaster but finished it with lacquer so I guess that's out. In the future they will get a oil finish:) 1 Quote
runningwood Posted July 15, 2011 Report Posted July 15, 2011 looks really nice. Did you use CNC for the cutout ? Where did you get the copper ? Quote
R Jones Posted July 15, 2011 Author Report Posted July 15, 2011 looks really nice. Did you use CNC for the cutout ? Where did you get the copper ? Thanks guys:) Yes, I used a CNC however even that had it's challenges. A local metal supply company often has small pieces they sell as "artist copper" so... Quote
sapele steve Posted August 1, 2011 Report Posted August 1, 2011 I've been wanting to try some inlay myslef. Can you explain the process in more detail? Is the CNC an automatic type of routing machine? How did you get the Copper to fit so well? BTW, great job......Steve Quote
andreas Posted August 2, 2011 Report Posted August 2, 2011 I've been thinking of trying something similar with polished stones. What kind of adhesive did you use? Quote
jHop Posted August 4, 2011 Report Posted August 4, 2011 by "artist's copper," I assume it's small blocks of solid copper? Or is it something you need to melt down (smelt down?) and pour? My limited experience with copper comes from plumbing repairs, copper rivets, and the odd copper rod this one hardware store sells. I have seen hammered copper basins, but never been allowed to touch them. (Don't know why the museums have this "no touch" policy. It might make going to them more fun.) This is a fantastic ornamentation! I could see so many uses for them.... Christmas trees, door knobs, door knockers, closet knobs, serving trays, centerpieces, candle stands, etc. I'm tempted to start one myself... Aside from that CNC part, that is... Quote
Mqutkingdom Posted August 18, 2011 Report Posted August 18, 2011 great contrast. overall a great idea. but next time try a tighter grained wood it might look a little better Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.