Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

mobile bench

Featured Replies

I have been pondering a mitre saw station. I have seen some really nice plans out there and I was also keen for storage that will last, also the thought of being able to wheel the unit around the shop is attractive. I stumbled across this metal toolbox with ball bearing drawers.

6 feet wide x 3 feet tall x just under 2 feet deep. Have a look at how many drawers! Timber top that could be reused somewhere else while I build my own top for it. The middle cupboard could house a shop vac with the suction hose hooked up to a big mouth originally designed for a lathe set up behind. The price of these things is $700. Make a base that will cost about 2/3rds the price for materials or just buy one of these as a flatpack and spend a couple of hours assembling it? I have another toolbox I bought from this company and it is stunning, works brilliant, it went together easy, had it for 2 years.

This might sound like I am made of money, but if I bought 2 of them, I could bolt them together end to end, replace the tops with one top built out of a couple of plywood beams about 14 feet long, biscuit jointed and under bench top bolts, finish and I end up with a massive storage area and a great mitre saw station! 453692503_o.jpg

Dave,

It sounds ok to me. What I would recommend is consider the cost vs. your time. If you're making your own would run you 2/3 the cost just for materials, than buying seems to be a great deal.

  • Author

Dave,

It sounds ok to me. What I would recommend is consider the cost vs. your time. If you're making your own would run you 2/3 the cost just for materials, than buying seems to be a great deal.

Hi Dyami.

Materials are a bit more expensive in Australia than America from what I am seeing. Those drawer slides are about $30 a pair from memory. There are 12 pairs in this cabinet, that's $360 straight off, half the price of the unit. The wheels are $100 for the set, we are at $460. The ply, 5 sheets I guess, $70-80 per sheet ( mostly it comes from America so shipping and GST on top of what you guys pay)$400? Wow, without the laminated benchtop it is $860. I can use that top elsewhere in the shop so there is an extra. If my figures are out even by $160 it would seem like a false economy for me to build one from timber. Did you notice the end panels are peg board pattern punched steel?

Looking at it broken down makes me think this is a better deal than I first thought! :rolleyes:

Those drawer slides are about $30 a pair from memory. There are 12 pairs in this cabinet, that's $360 straight off, half the price of the unit.

Is it a big deal to ship stuff from the US to Australia? If not, these guys have really good prices on quality drawer slides:

http://www.woodworkershdwe.net/servlet/StoreFront

-- Russ

  • Author

Thanks for the link Russ. I checked their site and they seem keen enough to deliver to Canada but am awaiting their reply to my request for a price per weight and size of item or total delivered to Australia. Weight would probably be the main factor. Will let you know.

The other thing is that the cost of the ply..... and if I could get the drawer slides at a good price, still comes in being cheaper to buy than build. It is a sign of the times that we (America and Australia) have priced ourselves out of the manufacturing market. :huh:

  • Author

Purchased the bench yesterday and thought I would assemble it today. Whilst the bench unit took about 90 minutes to unload, decipher the plans and assemble without issue, the drawers were another story. I misread the instructions and only realised when I had 11 drawers assembled. :blink: So, I took them all apart and reassembled and realised 2 things.

1. what a knob I was for stuffing such a simple thing up.

2. what a very well engineered product I had purchased.

I would recommend the product to anyone. The one thing I got wrong was the interpretation of size from metric to imperial. The unit is 20 inches deep, not 24 inches deep. :(

  • Author

Good for you.

One question: Did the shop-vac fit in the center?

Hi Chet. I haven't tried yet, but what I will do for you is measure the dimensions inside the center cupboard. One thing I think would be to line the inside of that area with polystyrene or similar sound deadening material as the sheet metal back and floor of the cabinet may start to resonate. Lol. I do have a triton dust collector that you put in line similar to the dust deputy and am pretty sure it would fit and then have it connected to a vacuum that could be in another room even.

If you line the cupboard with sound insulation, you may have a problem with heat if you put a vacuum in there.

If you put a shop vac in another room, you may lose too much power pulling the air through a long narrow hose. The dust deputy will also drain power. If you go with a larger duct, then you may lose velocity and have dust fall out if suspension in the hose.

There are several threads in this forum about designing a dust collection system.

  • Author

If you line the cupboard with sound insulation, you may have a problem with heat if you put a vacuum in there.

If you put a shop vac in another room, you may lose too much power pulling the air through a long narrow hose. The dust deputy will also drain power. If you go with a larger duct, then you may lose velocity and have dust fall out if suspension in the hose.

There are several threads in this forum about designing a dust collection system.

Thanks Beechwood. I will definitely scour the site for more info regarding dust extraction. My response was purely an off the cuff one that showed "maybe" possibilities. :)

The most likely scenario for me at the moment is to get a mobile 2 horse 4 inch extractor to just plug into any machine I have going. But this will be in a little while. At present I have the triton and also a standard house barrell vacuum cleaner that will keep me out of trouble. That will be used in conjunction with my new purelite face protection P2 blower.

post-5160-0-23419800-1311203106_thumb.jp

  • Author

I've been looking at powered full face respirators for a while, because I can't get a really good seal when my beard gets bushy. Let me know how you like yours.

I love the full face device. I also have a beard. It takes a little getting used to, you have to position it so that it is balanced on your head rather than letting it fall forward prior to tightening up the head clamps.

  • Author

Hi Chet. I haven't tried yet, but what I will do for you is measure the dimensions inside the center cupboard. One thing I think would be to line the inside of that area with polystyrene or similar sound deadening material as the sheet metal back and floor of the cabinet may start to resonate. Lol. I do have a triton dust collector that you put in line similar to the dust deputy and am pretty sure it would fit and then have it connected to a vacuum that could be in another room even.

Chet, the cupboard dimensions are 21 x 18.5 inches in plan view, allowing for door being closed etc. and the height is 28 inches. Big enough?

Chet, the cupboard dimensions are 21 x 18.5 inches in plan view, allowing for door being closed etc. and the height is 28 inches. Big enough?

Hmmm... not sure.

Dust collecting is always such a game of give and take.

A little vac will fit, but I use my Sliding Compound Miter Saw enough where I don't want to have to dump the canister all the time. Perhaps a hose from the main collector is the way to go.

I do like the idea of using the cabinet as a base. I've been farting around with a new miter saw stand for sometime now and this seems like a great idea.

By the way, where did you find this cabinet?

I surfed the web and couldn't seem to find it.

If you posted a link and I missed it, I apologize in advance.

  • Author

By the way, where did you find this cabinet?

I surfed the web and couldn't seem to find it.

If you posted a link and I missed it, I apologize in advance.

http://www.ebay.com.au/itm/MAXIM-72-Roll-Cabinet-Toolbox-Tool-Box-Workbench-Chest-/230647148519?pt=AU_Tool_Parts_Accessories&hash=item35b3a42fe7

That looks like a nice cabinet, Dave. Do you think you can install central vac?

  • Author

That looks like a nice cabinet, Dave. Do you think you can install central vac?

Maybe a small one.

Here it is in the shop beside the mitre saw on the site stand.

post-5160-0-48368600-1311581664_thumb.jp

  • Author

I am getting another cabinet from the same supplier, I am that impressed with this one! Smaller unit this time, to be used as a power tool caddy and housing for my vac to wheel around the shop and generally make me feel important, lol :P

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.