Popular Post gee-dub Posted May 20 Popular Post Report Posted May 20 I noticed some spots on the tablesaw a week or so ago. I assume some sweat dripped from my chin or the back of my hand at some point. My shop is not a show room. I work my tools. I have used the tablesaw nearly every day since 2013 with the exception of the year it took me to build the current shop so lets call it 12 years. I am not abusive but I do not baby it either; it is a tool. I have used Boeshield's Rust Free since two tablesaws ago with good success. It is caustic. You need to wear gloves and a respirator but, it does the job fast, fast, fast. A few sprays onto a paper towel and a wipe down of the affected area followed by a wipe down with mineral spirits or (my favorite) CRC 3-36 to neutralize the acidic elements and you are good to go. The top may not look perfect but after all the stuff I have put it through for a dozen years . . . not bad. 9 Quote
Coop Posted May 20 Report Posted May 20 Do you apply the Boeschield with an abrasive pad of some sort? Do you wax it after the wipe down with mineral spirits? 1 Quote
Popular Post gee-dub Posted May 20 Author Popular Post Report Posted May 20 I use a paper towel as the Rust Free works pretty quick and if you don't get it off promptly it can leave more discoloration than it cures. I have used some high grit abrasive if I need to knock down any ridges from deep scratches. I use paste wax after everything else. 5 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.