Popular Post gee-dub Posted June 19 Popular Post Report Posted June 19 My fault. I usually do a grip of boxes, picture frames and such between projects. Despite several marshmallow roasts with the grand-kids and late-night grown-up barley-pop conversation sessions around the fire pit I have way too much spoil. Despite my best efforts spoil is snow-drifting up on machine surfaces (something I consider to be a mortal sin). Even my "odd-bits of stuff" tub is threatening to explode. I have emptied this barrel into the fire pit a few times since May. The shop elves keep filling it back up. My shorts racks have really gotten out of control. I know what the cure is. I have to stop what I am doing, put on some gloves and empty these things, go through them, keep the best, and send the rest to the burn pile. I just get on a roll and hate to stop for administrative duties. Tomorrow morning . . . I attack! 6 Quote
Popular Post gee-dub Posted June 19 Author Popular Post Report Posted June 19 On 6/19/2026 at 5:27 AM, Mark J said: Ah, but how to decide "who lives and who dies". I know, right? My method is to empty the bin, lay the stuff out on the floor, select the best pieces and put them back in the bins. When the bins get full, just like musical chairs, anybody without a spot . . . dies. 1 2 Quote
Popular Post gee-dub Posted June 19 Author Popular Post Report Posted June 19 At least I remembered to get some "before" shots. I really need to make some gift boxes . . . Not to mention the ply and composites. . . OK, so maybe this is an exercise in futility . . . pick your favorite child; Bubinga, Bird's-eye maple, Cherry, Curly maple, White oak, Red oak, Mahagony, Sapele, Poplar, Shedua . . . And that's all from the front section of the "panels" off-cuts bin. I feel like I have only gotten started and it is almost time for lunch. the vertical tower may have to wait till tomorrow . . . we'll see. 3 Quote
Popular Post gee-dub Posted June 19 Author Popular Post Report Posted June 19 Wow, you never know what you have until you stop and go through it. These are pieces 20" to 60" that will probably make the cut (no pun intended). Once I got the bin emptied I found a pair of Wells Lamont gloves that look like they've never been worn. Must have been down in there for several years. 5 Quote
Popular Post gee-dub Posted June 20 Author Popular Post Report Posted June 20 I don't think this thing has been vacuumed out in a while. I try to keep things tallest to shortest so I don't have to paw through them so much. It may just be the nerd in me but . . . I feel much better now. BTW, I made this bin back in about 2007. Plywood bottom, dimensional skids and MDF verticals. Three shops later . . . still going. 5 Quote
fcschoenthal Posted June 20 Report Posted June 20 I've got a t-shirt that says "It's not hoarding if it's wood". I think you deserve it more than I do. 2 Quote
Ron Swanson Jr. Posted June 20 Report Posted June 20 On 6/20/2026 at 4:35 PM, fcschoenthal said: I've got a t-shirt that says "It's not hoarding if it's wood". That's bloody brilliant!! Quote
Popular Post gee-dub Posted June 20 Author Popular Post Report Posted June 20 Brilliant indeed. I have a long running collection of t-shirts. One of my favorites (although I have so many favorites) was from my daughter: 3 Quote
Von Posted June 21 Report Posted June 21 On 6/20/2026 at 9:15 AM, gee-dub said: I feel much better now. BTW, I made this bin back in about 2007. Plywood bottom, dimensional skids and MDF verticals. Three shops later . . . still going. I'll bite: what's the story with the grey OSB(?) that is clamped to the front left? 2 Quote
gee-dub Posted June 21 Author Report Posted June 21 @Von - That is actually a plate of aluminum. I occasionally lop pieces off to use as miter bars or other jig parts. It kept getting moved from place to place in the shop so I finally took a small c-clamp and clamped it to the shorts rack. 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.