Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Lie Nielsen #4 Smoothing Plane - Iron

Featured Replies

  • Popular Post

It's been a while since I bought a bench plane. So I thought I'd go through setup and give a review based on a very short test period. 

First, it ain't cheap. $375 in iron, $525 in bronze, with tax and shipping on top of that. So for that price, I expect perfection, and as has been my experience with Lie Nielsen, they delivered. 

The fit and finish out of the box is just unlike any tool I've ever bought. Every surface is flawless. It's well packed in it's box with bubble wrap, paper, and that fancy paper that inhibits rust. 

No issues there. 

The blade is somewhat sharp, but obviously you're meant to hone it yourself, so I threw on an album from my favorite band on, flattened my water stones and got down to business. 

First order of business was to pull everything apart and clean off the oil. There's isn't all that much of it, but it still needs to be done: 

20260919_153217.thumb.jpg.acaad58c586e7c9eb718a8f225c63c63.jpg

Onto the blade. 

For the back, I used the Charlesworth ruler trick. I watched one of his videos explaining it, as a refresher. 

I used my 8000 and just a few strokes on the 16000 stone. It polished up very quickly and nice and consistently across the width of the blade.

20260919_160832.thumb.jpg.e4539014b12747bac051e36c407d5c52.jpg

20260919_160910.thumb.jpg.893f4d7f3824bd19e7146bc37a70c527.jpg

I sharpen free hand mostly, but I've returned to using the jig for my smoother blades. It's the finest and fussiest edge in my shop and I'll take all the extra help I can get. 

20260919_162016.thumb.jpg.c167986ef25d252acc6818c89034f867.jpg

I used the 3000, 8000 and 16000 stones, about 7-8 one-direction strokes on each one is all it takes to raise a burr. 

20260919_162135.thumb.jpg.4b01b784a974fb386b284b840c3c4e85.jpg

Then put it back together.

 I tested it out on a piece of hard maple. 

At first I was getting some accordion shavings, which was a head scratcher. 20260919_172319.thumb.jpg.2d9e9921b2e57b27bca54226675d5793.jpg

 

This usually happens when the CB is set too close to the edge. I didn't think I had it too close, but the results don't lie. So I used the thickness of the ruler to reset the CB, and that did the trick . I got what I was looking for - nice, even shavings around 1/1000". 

20260919_170350.thumb.jpg.69f43c7920cf699042f0c0a530fe8e14.jpg

 

I've still got some putzing to do with it, adjustments, etc.  but man am I ever happy so far. 

 

My only complaint, is the lateral adjust lever is REALLY stiff and difficult to make a fine adjustment. I'm not going to bother LN with this, as I believe it will relax and loosen up a little with use. 

 

But aside from that, this thing is more than I could've asked for quality-wise and is far too fine a tool for a hack like me. I'm really excited to put it to use.

 

Nice write-up in the set-up. Congratulations on the purchase and may it serve you well.

  • Popular Post
On 9/19/2026 at 4:30 PM, Ron Swanson Jr. said:

…I used the 3000, 8000 and 16000 stones, about 7-8 one-direction strokes on each one is all it takes to raise a burr… 

Question:  Do you remove the burr at the end of each grit, or just at the end of total sharpening?  They seem to do it either way on the Ewetubes I’ve watched, with one guy only removing the burr with his leather strop.  

  • Author
  • Popular Post
On 9/19/2026 at 9:29 PM, Botch said:

Question:  Do you remove the burr at the end of each grit, or just at the end of total sharpening?  They seem to do it either way on the Ewetubes I’ve watched, with one guy only removing the burr with his leather strop.  

Not usually. When I'm doing the micro bevel, after the last stone, I turn it over and remove the burr on the finest stone, the same as flattening the back. 

This was an initial sharpening of a brand new blade, so I used a variety of grits. But after that's done, for touch ups and regular honing, I will usually just use 2 stones - 3000 and 8000.

 

13 hours ago, Ron Swanson Jr. said:

7-8 one-direction strokes

I'm curious which one direction you go?

I'd go ahead and make an inquiry with LN now regarding the stiff lateral adjustment.  After all, it is a LN plane.

  • Author
On 9/20/2026 at 7:22 AM, Mark J said:

I'm curious which one direction you go?

I'd go ahead and make an inquiry with LN now regarding the stiff lateral adjustment.  After all, it is a LN plane.

I pull the blade back towards me, lift it, reset it and repeat. 

I don't really have great justification for doing it that way, other than that's how I was initially taught and I'm really trying to focus and get this one dialed in perfectly. 

When I sharpen free hand, I move in circles. 

  • Popular Post
On 9/19/2026 at 5:30 PM, Ron Swanson Jr. said:

My only complaint, is the lateral adjust lever is REALLY stiff and difficult to make a fine adjustment. I'm not going to bother LN with this, as I believe it will relax and loosen up a little with use. 

Yep it will loosen up after a bit of use at least it has on mine.

On 9/19/2026 at 9:29 PM, Botch said:

Question:  Do you remove the burr at the end of each grit, or just at the end of total sharpening?  They seem to do it either way on the Ewetubes I’ve watched, with one guy only removing the burr with his leather strop.  

FWIW I'm a leather strop guy to remove the burr and I typically do it when complete

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.