Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Oil and paste wax

Featured Replies

Hi all,

 

My first post. I'm finishing a walnut table using boiled linseed oil and paste wax. The top is sanded down to 400 grit and I've applied three coats of oil. My first coat of paste wax doesn't seem to be buffing out. It's staying cloudy. The humidity is about 65%. Could this be the problem or maybe 24 hours wasn't long enough for the oil to dry enough? Should I let it sit and try another coat of wax later?

Thanks, Mike

  • Popular Post

BLO takes about 4 times longer to cure than you will ever expect it to.  I had to stand this table in my guest bathroom for about 5 weeks before I could wax it.  Since then it has performed very well. 

FWW-post-2.jpg.7cdeb61a3b40e6fc14bf6cc9ebd0fdfc.jpg

Since then I have never "flooded" BLO ever again.  I do use it but hit 1:1 with mineral spirits and applied lightly.  Usually as an element in a 1:1:1 mix of oil and varnish.  BLO is a wonderful material.  It penetrates, self levels and cures deep in the wood.  The downside is that it takes a long, long, time if it is the only element in your finish mixture.  I find a bit of Japan Drier helps.  Be sure to read the directions; a little bit goes a long way and too much can lead to a brittle top coat.

 

  • Popular Post

First welcome to the forum!

Re your question, I agree with @gee-dub if you didn't wait 6-8 weeks for the BLO to dry Its almost guaranteed to be the issue.

  • Author

Thanks guys, I think this is probably my problem. It seems like the oil is keeping the wax from setting up. I've gone back every few hours today and wiped a little more, but it's not really getting much better. Will it eventually dry? If I keep wiping will I get rid of the contaminated wax or what would be the best way to deal with this?

Thanks, Mike

image0.jpeg

image1.jpeg

image2.jpeg

If the wax is petroleum based I would say yes, continued wiping will get you there.  Flooding BLO causes a deep penetration and "weeping" (the reappearance of droplets) is normal.  You basically go back to the piece several times a day and wipe it down like you changed your mind.  Eventually it should cure.  Once dry to the touch,wait another week and then try waxing again.  Good luck.

@pkinneb - Shame on me for not saying so.  I get caught up in the technical sometimes.  

It is indeed a beautiful piece.  Well worth the extra time and effort to get to the finish line; no pun intended.

@Mike316, welcome to the forum. I can only echo the above advice, as my initial experience with BLO was nearly identical to yours. There is an old 'rule of thumb' for using linseed oil: wipe on a thin coat, once daily for a week, once weekly for a month, and once monthly for a year. I'm not that patient, so I abandoned straight oil as a finish.

As for your project, the design is clean & elegant. You executed the build quite well, and your selection of material is exceptional. Very well done, sir!

Welcome to the forum. Great looking table.

I put BLO on my workbench (mixed 4-to-1 with mineral spirits) and it's still tacky in spots after weeks, so I echo others on the long curing time. I've never tried to put something over it.

Welcome to the forum.

That is a nice table.  Please let us know how the finish works out.

  • Author
  • Popular Post

Thanks guys, I'm really glad that I found this group. It goes to show that I'm never to old to learn.

This is a piece that I'm donating to Shaw Nature Reserve, which is part of the Missouri Botanical Garden. A friend had to cut the tree so he had it sawn up and donated some of it to me for this project.

I studied wood working and wood science at the University of Missouri Columbia, taught and ran a business building furniture and cabinets for most of my working years. Finishing has always been my shortcoming. I mostly applied lacquers and poly, but more recently have gotten back to oil. So this has been a little humbling, which is always a good thing.

I noticed that the legs and rails took the wax well, but I applied a third coat of oil to the top and it was just too wet when I tried to apply the wax.

Thank you again and I really do appreciate your expertise,

Mike

  • Popular Post

At this point the table probably needs less product, not more. Keep wiping off anything that works back to the surface and give the BLO plenty of warm air and time to cure before touching the wax again. One safety thing worth mentioning because a lot of people learn it the scary way: don't wad those oily rags up and throw them in a trash can. Lay them out flat somewhere safe to dry or handle them in a proper metal container. BLO rags can heat themselves enough to start a fire. Beautiful table isn't worth burning the shop down over.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.