Recommended Posts

Posted

I keep thinking I should add a fence to my drill fence table, but I end up just clamping the part to the table without a fence.  If the part is small, I clamp it in a hand screw clamp and clamp that to the table.

I guess the fence is quicker, and keeps the part from spinning?

  • Like 2
Posted
On 10/20/2026 at 8:15 PM, Beechwood Chip said:

I keep thinking I should add a fence to my drill fence table, but I end up just clamping the part to the table without a fence.  If the part is small, I clamp it in a hand screw clamp and clamp that to the table.

I guess the fence is quicker, and keeps the part from spinning?

They are nice especially if you are repeating the holes in multiple parts. Like you I use a screw clamp for small parts and then then push it up to the fence for location.

  • Like 1
Posted

I love my fence. The only downside is it makes the knobs for locking/unlocking and raising/lowering the table hard to reach. Somewhere on the forum I have my modifications to add a motor for height and quick-release for locking.

10 hours ago, Beechwood Chip said:

I guess the fence is quicker, and keeps the part from spinning?

Yes, especially if you are drilling metal and are too lazy to get an appropriate vise. And it allows for holes a consistent distance from the edge of a piece.

It also makes for a convenient way to have a stop from the end but I find I rarely do that, your workflow may vary.

  • Like 1
Posted
On 10/21/2026 at 10:35 AM, Beechwood Chip said:

I already have a table with MatchFit slots

That's a good solution.  I have not taken the dive into the MatchFit system, although it looks pretty interesting.

Posted
On 10/21/2026 at 10:44 AM, Jfitz said:

I have not taken the dive into the MatchFit system

I'm not sure that it's "better" than T-track, but I've got all the clamps and doohickeys so I'm invested.  I like that I can cut the slots in almost anything.  But, I still have T-track on things I've purchased like my router table.

  • Like 1
Posted
1 hour ago, Beechwood Chip said:

I'm not sure that it's "better" than T-track, but I've got all the clamps and doohickeys so I'm invested.  I like that I can cut the slots in almost anything.  But, I still have T-track on things I've purchased like my router table.

+1 It's nice that you can cut grooves in anything for free once you've made the initial investment in bits.

  • Like 1
Posted

I also run "universal" t-track (5/16 and 1/4 compatible) along with MatchFit. Both seem to have their uses.  Due to the timeline of my woodworking I have a lot more track stuff than MatchFit but I only use the track stuff on things that already have track.  I rarely fabricate with it anymore.

  • Like 2
Posted

Nice purchase! Sometimes treating yourself to a quality shop upgrade saves time and effort compared with building everything from scratch. Your modifications sound practical, especially raising the table to clear the adjustment knob while leaving room for potential dust collection underneath. The deluxe fence should make the setup even more useful. Great job adapting it to your drill press!

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 72 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined