Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Should I get a resaw blade? Which one? Grizzly GO555LX 14" bandsaw

Featured Replies

My Grizzly GO555LX 14" bandsaw came used with a AllPro PGT ⅜”, 4 tpi, 105" blade. I've never had a for-purpose resaw blade. I probably do a small resaw job 3-4x/year, breaking down thicker stock, no veneer work. I clamp a tall fence to the stock one for wider boards.

My set up seems to work ok, but results in a rough surface, it's a bit slow, and I find I get some variation in the thickness. Any or all of these things could be user error. I compensate today by resawing a little thicker than I need and then running it through the thickness planer.

Those that know this path: Is it worth getting a dedicated resaw blade? Which one?

Obviously I don't need one as I'm making do without one, I think the question is: would I see enough improvement in some way to make it worth both buying the blade and taking the time to swap blades?

Thanks in advance.

I find 3/8" to be a really versatile size and it's on my BS almost permanently. 

I used to use a wider blade for resawing but I hate changing blades so I just ended up settling on 3/8". 

The surface is never super clean off the saw but I don't really expect it to be. I just expect to have to clean it up afterwards. 

That's my .02, but the guys who do lots of resawing and veneer cutting might have a little different take!

I would get a 1/2" Highland Woodslicer blade for your saw and give it a try. I use them exclusively and love them. FWIW I have used and still own a Resaw King and another carbide resaw blade and still use the Woodslicers exclusively. Also Like Doug above I leave the blade on my 16HD all the time weather I am resawing or not. I have a smaller BS for curves and that I have a 1/4" blade on, not sure what brand.

  • Popular Post

I also really like the Woodslicer 1/2" but it wears quickly.  I keep couple on hand for when I need a thin kerf resaw job done.  My standard is a 1/2" carbide tipped blade but I have heard a lot of horror stories about running carbide blades on 14" wheels.  Snapping a $200 blade is no one's idea of fun.  There are bi-metal blades that out live carbon steel.  I have run (and run through) a lot of Timberwolf silicon steel blades.  Like the Woodslicer, they do a great job but only cut so may lineal feet of some dimension of some material.  It is economical in the long run to have a selection on hand and not to shy away from changing blades to suit what you are doing.  You will find your happy place.  Keep on pushing.

On 11/4/2026 at 3:31 PM, gee-dub said:

I also really like the Woodslicer 1/2" but it wears quickly.  I keep couple on hand for when I need a thin kerf resaw job done.  My standard is a 1/2" carbide tipped blade but I have heard a lot of horror stories about running carbide blades on 14" wheels.  Snapping a $200 blade is no one's idea of fun.  There are bi-metal blades that out live carbon steel.  I have run (and run through) a lot of Timberwolf silicon steel blades.  Like the Woodslicer, they do a great job but only cut so may lineal feet of some dimension of some material.  It is economical in the long run to have a selection on hand and not to shy away from changing blades to suit what you are doing.  You will find your happy place.  Keep on pushing.

What 1/2" carbide blade are you using? Maybe my issue has been my carbide blades were all 1" ^_^

  • Popular Post

@Von, in my early days of experimenting on the bandsaw, I found a lower tooth count to help more than anything when sawing deep, like a resaw cut. 3 tpi skip-tooth leaves a remarkably smooth surface, as the wider gullets carry away the spoil. Helps eliminate wandering, too, as the spoil doesn't bind in the kerf and force the blade to deflect.

And feed just fast enough to cut, not rub.

  • Popular Post
On 11/4/2026 at 1:52 PM, pkinneb said:

What 1/2" carbide blade are you using? Maybe my issue has been my carbide blades were all 1" ^_^

I have been running a 1/2" Laguna Re-saw King for several years.  Long enough to have one or two sent in for a resharpen anyway.  Here's something to note; they do not replace missing teeth.  This is not a problem on a 10-foot-plus blade but could be on something else.

I used to run 1" blades, picked up some 3/4" on sale, and then some 5/8" on sale after that.  I never noticed any reduction in result (except in my wallet). I had good luck with the 1/2" Woodslicers and so took one for the team on the 1/2" Re-saw King.  It has served me well and I have a spare for when it is out for sharpening.  I still use the Woodslicer for thin kerf requirements and the Timberwolf for roughing out.  They both do great for their expected lifetimes.  The thing to remember is that bandsaw blades are pretty much like brake shoes . . . they work while they work and when they don't, replace them quickly.

I should have mentioned that even though the Resaw King leaves a fairly smooth surface I still plane or drum sand stock to final thickness; whichever seems appropriate for the material. 

  • Author
1 hour ago, Mark J said:

@Von, have you ever had your blade sharpened? 

No.

I'm not sure I have a service nearby that would sharpen a bandsaw blade (Rocker or Woodcraft?).

I've seen some sharpening jigs but haven't attempted it. Given a rough guesstimation of the amount of work involved, I'd lean towards replacing rather than sharpening myself, but perhaps I'm overestimating it. Seems like a lot of teeth.

I'd definitely consider getting a dedicated resaw blade, especially if you're dealing with thicker stock. A 3/8" 4 TPI blade is more suited to general cutting than resawing. A wider blade with fewer teeth, around 1–3 TPI, will generally give you better tracking, faster cutting, and more consistent results. The blade won't eliminate drift or thickness variation entirely, though.

  • Author

All, thanks for the responses. I admit I'm having a little bit of a challenge pulling out conclusions, but I'll take a stab:

  • As always, sharp cures many problems and making sure I'm using a sharp blade is probably most important. I'm still under the impression bandsaw blades in the price range I'm looking at (<$50) are replacements rather than re-sharpenings.
  • A lower TPI is worth looking at. I'm readily finding 2-3 TPI blades for sale.
  • Wider isn't obviously better.

So I think my conclusion is I will try getting a lower TPI 3/8" blade and trying it out both for resawing and general use. For my limited bandsaw use, it's not clear to me iths worth changing blade a lot, but trying a different blade may convince me otherwise.

Thanks again!

1 hour ago, Von said:

All, thanks for the responses. I admit I'm having a little bit of a challenge pulling out conclusions, but I'll take a stab:

  • As always, sharp cures many problems and making sure I'm using a sharp blade is probably most important. I'm still under the impression bandsaw blades in the price range I'm looking at (<$50) are replacements rather than re-sharpenings.
  • A lower TPI is worth looking at. I'm readily finding 2-3 TPI blades for sale.
  • Wider isn't obviously better.

So I think my conclusion is I will try getting a lower TPI 3/8" blade and trying it out both for resawing and general use. For my limited bandsaw use, it's not clear to me iths worth changing blade a lot, but trying a different blade may convince me otherwise.

Thanks again!

I think that's a good, level headed plan. 

On 11/7/2026 at 8:01 AM, Von said:

All, thanks for the responses. I admit I'm having a little bit of a challenge pulling out conclusions, but I'll take a stab:

  • As always, sharp cures many problems and making sure I'm using a sharp blade is probably most important. I'm still under the impression bandsaw blades in the price range I'm looking at (<$50) are replacements rather than re-sharpenings.
  • A lower TPI is worth looking at. I'm readily finding 2-3 TPI blades for sale.
  • Wider isn't obviously better.

So I think my conclusion is I will try getting a lower TPI 3/8" blade and trying it out both for resawing and general use. For my limited bandsaw use, it's not clear to me iths worth changing blade a lot, but trying a different blade may convince me otherwise.

FindMetal Stocks

 

Thanks again!

A sharp 3/8" blade with 2–3 TPI is a reasonable starting point for resawing and general use. You can always experiment with wider blades later if you find you need more stability or straighter cuts.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.