Recommended Posts

Posted

This looks like a friendly bunch so I thought Id introduce myself before asking a bunch of questions. My name is Don, I've been a woodworker for about a quarter century here in western Washington. Currently I'm shop less for the time being. A few weeks back I lost my shop and every tool to a fire. Trying to look at the bright side I'm prepping for a new shop. The permit applications have been submitted and the new shop will hopefully be built soon. Nothing fancy just a 22x22 garage that will never see a car. Been doing alot of window shopping, picking equipment and running build processes in my head trying not to forget anything. The goal is just to place one big order online through Woodcraft be be done. That it in a nutshell.

Don

Posted

Howdy Don. Sorry to hear about your old shop, hopefully insurance will cover most of replacing it. On the other hand, you get to start over again from scratch with a better idea on what you need. Make sure you post your progress, I'll be interested in following it.

Josh

Posted

Glad to meet you Don sorry to hear about the fire. What part of western Washinton are you in? I'm in Rochester Washington 20 miles south of Olympia looking forward to hearing whats happening with your new shop. Dave

Posted

Glad to meet you Don sorry to hear about the fire. What part of western Washinton are you in? I'm in Rochester Washington 20 miles south of Olympia looking forward to hearing whats happening with your new shop. Dave

Your not that far from me, I'm in Parkland just outside Tacoma. A new building will be nice, as far as tools go Im just going to replace with what I had. The nice folks at Woodcraft have done a great job delaying the powermatic shipment so I can just have it dropped in the building. The first time around we moved it all in by hand, something I'd never want to do again. I should post a list and have you guys add to it all the little stuff Im sure Im forgetting.

Don

Posted

that sucks hopefully you have good insurance if not big price to pay but if you do yaye you get all new tools to try out im actuly a little excited for you my favorite part of starting to set up my own shop is figureing out how i want to have it all set up......thinking tools will be on wheels and stoarage will be in rolling cabinets that fit under counter.( when i finaly get a decent size shop probably attached to home will be part of homeowner insurance/busness)

Posted

that sucks hopefully you have good insurance if not big price to pay but if you do yaye you get all new tools to try out im actuly a little excited for you my favorite part of starting to set up my own shop is figureing out how i want to have it all set up......thinking tools will be on wheels and stoarage will be in rolling cabinets that fit under counter.( when i finaly get a decent size shop probably attached to home will be part of homeowner insurance/busness)

Insurance is a bit of a slippery slope, especially combining business and personal, do a lot of homework! The only thing I'm going to change is the dust collection, festool and the mortiser. My old collector was a 3 hp cyclone but it really never seemed to do all that great of a job, probably due to the poor duct design or lack of design. This time around I'll spend a little more time and get the metal duct pipe run properly, if I can figure out what proper is. All the heavy Iron goes on the outside walls with the table saw in the center so I cant really see a way to go with the proper large main trunk and smaller drops. May have to run a big 8" trunk and 6" branches with 4" or 5" drops. The mortiser was a Laguna Vway slot mortiser and I think I'll give the FMT a shot just to save on floor space. The festool...... well I had some pretty serious money invested in festool. I went a little crazy and bought pretty much everything they make. Probably wasn't the wisest decision but the wall of cool looking boxes sure looked cool, This time NO festool.

Don

Posted

well for insurance i mostly want to have acident coverage because i would like to do classes there to teach kids and adults how to work with wood and wood working is no longer tought in schools around here. and i cant afford festool im now picking up stuff at garage sales like i just bought a dremel for 10 bucks. ill piece it together slowly. but my next big purchase is a lathe a turner i met on here recomended the delta 46-460

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 37 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined