DesmondPringle Posted October 28, 2011 Report Posted October 28, 2011 Hello, I am just beginning to start woodworking, I was looking the video "A Cut Above" about the cutting board and I bought some purple heart wood and I was looking for a beginner table saw. I am on a limited budget and was looking at the box stores for one of their inexpensive table saws and wondered if they would be okay for just starting out and getting my feet wet. Also I wanted to know if they would be able to rip cut wood for the cutting board project. Thanks Quote
Beechwood Chip Posted October 28, 2011 Report Posted October 28, 2011 I'd say that you can definitely do a cutting board on an inexpensive saw. With an inexpensive saw it will be more difficult to get accurate cuts. You may have to buy more wood for test cuts and for mistakes. I'd suggest buying a less expensive hardwood to practice your technique before tearing into your purple heart. You might want to read this thread. Quote
woodwhisperer Posted November 4, 2011 Report Posted November 4, 2011 I totally agree with Chip. With a good quality blade and some patience, you should be able to make the cuts required for the cutting board. Consider a Forrest or Tenryu thin kerf blade. Quote
JayWC Posted November 4, 2011 Report Posted November 4, 2011 Also...don't forget another tool many people seem to overlook as a starter tool...that is the band saw. If you're just starting out a band saw will provide you (IMHO) with more flexibility as to the number of things you can do with it. Quote
areynoldsre Posted November 4, 2011 Report Posted November 4, 2011 I bought the DeWalt 744 years ago as a "starter" and am still using it. For most small projects and even some basic cabinetry it has been acceptable. I did buy a couple of good Forrest blades for it. I had every intention of getting a "better" one some day but I have a very small shop space and am likely not to buy a bigger better saw. In any case the more I get into the hobby the more I pick up hand tools. Don't think I'll be getting many more power tools. But I have been thinking that a band saw would be a great addition. There are even times I wish I had bought a band saw rather than the table saw. Also when I do have projects that require a table saw bigger than mine (like cutting sheet goods) I can get some milling done cheap at the lumber yard ($1 a cut) and can trade favors with the guys in my local wood working club for time on their equipment (sometimes just a six pack gets a whole project cut). Quote
knotscott Posted November 4, 2011 Report Posted November 4, 2011 I think the type of saw you get is easily as important as what brand and what store it comes from, possibly more so. A decent full size stationary saw with a belt drive induction motor will have several advantages over most benchtop or portable saws with a direct drive universal motor. There's far more operating room on the table, especially in front of the blade. There's more mass for better stability, more torque, quieter motor, smoother operation, more standard accessories, upgrades are easier with many options, reliability is better, and repairs are much more feasible. A decent new full size saw from a box store will run near $500. If price is the driving factor, I'd buy a good used full size saw over a new benchtop or portable saw if there's one available. Check Craigslist, Ebay, free classifieds, etc. If you need to move the saw from site to site, then a portable would make sense. Here's a good article from Rockler about the various types of table saws: http://www.rockler.c...s/table-saw.cfm Good setup and blade selection are key factors in the performance of any saw. Quote
DesmondPringle Posted January 26, 2012 Author Report Posted January 26, 2012 Thanks everyone for the replies, I actually forgot about my post sorry for the disappearance act. Looks like I might try the box store for an inexpensive saw for I have a limited budget and space and for the types of projects I want to do just starting out. Quote
rodger. Posted January 26, 2012 Report Posted January 26, 2012 I may sound like a broken record here, but you will probably be dissapointed with the performance of a low grade saw. You will probably outgrow it quickly, and it will to be replaced. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.