Recommended Posts

Posted

This forum is looking lonely with no post. :) Here is a quick dining table.

Rough out the slab.

Rough out the joinery

Assemble and shape

Some finish and another slab for the top.

Template for 42" top

Now a top

Posted

I'm curious what "quick" means. Are you 20 hours into this project?

I recently built a project and tweeted along the way, documenting the process. The little table took only eight hours to build, including design (which happened on-the-fly) and finishing. Once I get some quality pictures of the table, I'll post it on my blog along with all the process photos and tweets that went out along the way.

475635889.jpg?Expires=1324260033&Key-Pair-Id=APKAIYVGSUJFNRFZBBTA&Signature=Kx2Fcgh-odau-N0iSjkcUK6d8gFitQLU1Qc74lslDluN6B73gNWty-jOgW-0r4LIVEnhUwCJkBgezramCfdDQryvsgu7fPviaWNnqexpbZDmZPgKzWAJRXq-~WqmX9uYc4hsvi8mhnKWVXH1thiBWmntBNF9OWcsG0~FHPcLxVk_

Posted

Where did you get your legs that you have for your outfeed table? BTW very nice looking table so far

Those came from Rockler. I think they are work bench legs. They come with levelers and a bunch of useless hardware.

Don

Posted

I'm curious what "quick" means. Are you 20 hours into this project?

I recently built a project and tweeted along the way, documenting the process. The little table took only eight hours to build, including design (which happened on-the-fly) and finishing. Once I get some quality pictures of the table, I'll post it on my blog along with all the process photos and tweets that went out along the way.

475635889.jpg?Expires=1324260033&Key-Pair-Id=APKAIYVGSUJFNRFZBBTA&Signature=Kx2Fcgh-odau-N0iSjkcUK6d8gFitQLU1Qc74lslDluN6B73gNWty-jOgW-0r4LIVEnhUwCJkBgezramCfdDQryvsgu7fPviaWNnqexpbZDmZPgKzWAJRXq-~WqmX9uYc4hsvi8mhnKWVXH1thiBWmntBNF9OWcsG0~FHPcLxVk_

Like anything else the more you do it the quicker you get. Never really timed it and Im never in a hurry but probably no more than two hours to get to the sand stage.

Don

Posted

Would like to see some shots of you shaping those legs..pretty cool

Ryan,

I dont think you would find it all that exciting. Its all done on the band saw and shaper then touched up with an ro sander.

Don

  • 1 month later...
Posted

The center post is 5 pieces of wood. 4 with full length tenons going into the center piece 4 dados. The "feet" are attached with 2, 1/2" dowels and a long screw drilled through both piece before attaching to the center. FYI this is not my design its Sam Maloof's. The only difference is the direction that the screw goes in. Sam went in the other way and used plugs. There is a half lap tie in the bottom that cant be seen in the pics recessed about 3/4" into all the pieces. Top and bottom are the same except the top does not have the half lap tie.

Don

Posted

Like anything else the more you do it the quicker you get. Never really timed it and Im never in a hurry but probably no more than two hours to get to the sand stage.

Don

When you say your times (I've noticed they're always extremely short) are you factoring in going to the store to get the wood, travel time, stock selection, milling, gluing, clean-up, sanding, finishing and all? To me that's the ellapsed time. Or are you calculating just the time doing only WWing? To me that's the run time. In my opinion, either you're freaking fast or you have some powerful machines (or a shop monkey LOL).

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 39 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined