Recommended Posts

Posted

After sweating through the thought of spending all that money to get the TS55 saw and tracks, I treat those tracks with extreme care. They were still living in their original cardboard boxes. Dang, those Festool things are expensive!

But those boxes would eventually give out.

For Christmas my daughter made me a case for the tracks with their connector bars, stops, and clamps.

This is sooooo cool!

post-2115-0-78333600-1325136793_thumb.jp

Posted

Nice! Looks very professionally done...

If she wants a side business, you could sell those like hotcakes on the FOG...

Sorry, What's the FOG?

And yes, she would do that. She has her degree in Fashion Design and had one some awards for her designs. She currently sells on Etsy. Until she moved to AZ with her husband, she was the assistant to the owner of a custom wedding dress and design shop.

Posted

ask her to pad thema little so that less chance of dents and dings.

Actually, it is padded. There is a separate compartment for each 55" track, a couple track stops, two joiner bars, a pouch for two clamps.

The material she used inside the case is foam backed material. Looks like car roof liner with a foam backing.

The outside is nylon with 1" strapping for handles.

When she talked to me about this, I told her to think about a padded gun case. She looked at some rifle cases at Cabelas. I had sent her a photo of one that was very close to this concept.

post-2115-0-68033700-1325177051_thumb.jp

post-2115-0-90989100-1325177569_thumb.jp

Posted

planing on geting a track saw and the case is realy nice glad you guys planed on making it padded for each track. but my cases would spend more time on the wall then on the go. if you could conbine a case to hang on wall and take out as i need and to close up and carry with it would be perfect. maybe a hard body case with a open end so they can be slid out.

Posted

planing on geting a track saw and the case is realy nice glad you guys planed on making it padded for each track. but my cases would spend more time on the wall then on the go. if you could conbine a case to hang on wall and take out as i need and to close up and carry with it would be perfect. maybe a hard body case with a open end so they can be slid out.

I did see a hard case once. Over on Lumberjocks, a guy made a wooden case for his tracks.

The way she set the zipper allows me to pull the tracks out of the end of the case. If she sewed a loop on the end of the case, it could hang vertically. I will pass that on. Maybe like a couple of D rings sewn in with 1inch strapping.

Posted

looks like there might be a market out there if she can come up with some plans and maybe pattern then she can sell the rites to festool :)

I've told her that some others might like a case like this if she can make it work where it's worthwhile. That means quality, not bad material, nor bad labor. She knows the difference. She was sewing custom wedding dresses in a small wedding dress shop in Texas. We would go down there during the Tyler Rose Festival as her shop would construct the show gowns and the evening gowns for the girls in the festival. It was a lot of fun, small town with a old style parade, and a wonderful barbecue place called Stanleys. Incredible ribs at this place. I'm in Kansas City and I would put their ribs against any here.

She could make a pattern. Part of her degree included pattern making. I think that's why she was so good at interpreting the track specs, making cardboard models, and constructing a case for them.

She needs to think how she wants to proceed. Since she had to quit that wedding dress shop in Dallas and move to another city to follow her husband, I think building the cases has appeal to her to replace some of that income they lost.

We'll see how this goes. I learned that you don't really tell your kids what to do. You point to paths and they choose one!

Posted

what is her etsy name i used to sell hand made fabric monsters on there but quite when i didnt make any money would like to check out what she makes. maybe she can think of other cases like levels, chisles, ect.....

Posted
what is her etsy name i used to sell hand made fabric monsters on there but quite when i didnt make any money would like to check out what she makes. maybe she can think of other cases like levels, chisles, ect.....

It's elizabethscollections. Not sure why she has so little out there. She usually has many sashes and every color variation of her products.

The whole idea of making something and selling it is a lot more complex than it ever seems. You might not have hit a time when fabric monsters were big and demand was up. I have tried several things that always seemed like a no brainer to sell but they just didn't go. So I have some a few things but computer support has been my easiest money maker. Unfortunately, it never comes at the time I want it. I would love to have a product that I could make that fit into my schedule of a full time job.

Posted

the problem with the fabric monsters is no one wants to buy there kid a toy that cost 30 dollers for just a stuffed animal. sadly walmart has even invaded the artistic market and people will buy at big box stores. had fun doing it but to much of a time cost for the price (hand sewn) and if the iteam isent something that can be shown off or it wasent usefull for everyday then most people werent inturested.

Posted

Well, companies immediately think to shift labor to other countries to make the cheapest product available. And Walmart promotes that. Look at Snapper Power Mowers. Walmart told them they would sell Snapper in their stores if they moved their production to China (Thankfully they did not do it). No matter if it will fall apart in a year.

Heck, the software company I work for used to have 13,000 employees in the US. Now they have moved a major part of those jobs to China, India, Thailand, Ireland.

My wife's niece lives in Chicago and is an industrial designer. She works for a company that designs for several firms. Her husband designs for Sears. She has traveled to China several times as ANYTHING they design is made in China.

I am tired of it. I like the local Woodcraft guys but I wouldn't buy one of their planes. I buy Leigh Neilsen or Lee Valley. No Chinese knock off product that copied a good product. I buy any company that provides quality products, not outsourced junk.

I avoid anything produced in an outsourced cheap quality model that I can. It's hard sometimes. I think I am more sensitive to it as I see so many good paying programming jobs sent overseas at my company and see so many good guys without good jobs these days.

I think that this problem is why we have an underground economy of sorts. Look at the success of Etsy and eBay. The individual today is empowered more than ever to achieve some success of their own. If only you could overcome the costs of health care etc. and truly become self employed.

You may someday try your product again. You never know if you hit the right time, right quality, right product, you may find yourself wondering how to make enough of it!

If my daughter can economically make these cases that live up to the quality of Festool, and Lee Valley, etc that I think represent the best, she may have something. I hadn't really thought about this but have spent a bunch of time this week looking around at this idea. This will be interesting.

Come to think about it. My purchases this week, except for food, have all been eBay and Etsy!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 43 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined