Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Long Stretcher Length?

Featured Replies

Is it just me, or do the v8 PDF plans not explicitly have a long stretcher dimension? You can infer it from the gap stop plan where it says that the dadoes are for clearance on the short stretchers, but you've got to do some math to get there. Will there be a v9 of the plans that will have this?

No biggie. I was creating a story pole to see how the Roubo would fit into my cramped shop when I noticed the lack of an obvious leg-to-leg dimension. I imagine it's the 48-3/4" minus twice the remainder of leg width from the inside edge of the short stretcher to the inside edge of the leg. For the long stretcher length, just add the two tenons.

Andy

According to the Bench Crafted plans (handy here on my dining room table) 41-5/8". If memory recalls its the same on the SU plans.

Marc, falling asleep with baby on on chest - best moments ever! Been only three years here - still feel it.

Off hand, do you know if the newly updated SU file vary much from the Bench Crafted plans other than the end cap and gap stop changes?

  • Author

Thanks, guys. I figured I was looking at a work in progress (the plans that is). Just seemed like a "big picture" dimension that would have made sense perhaps on one of the overall design pages. Like I said, no biggie.

Sorry for the confusion guys. Marc has been very patiently waiting for me to finish the plans, and I'm juggling my own newborn too. Oh, not literally juggling her but you get the idea.

Anyway, 41 5/8" from shoulder to shoulder on the long stretchers is correct. Plus 2" at each end for the tenons, and the overall length is then 45 5/8".

V9 of the plans should be ready today (Jan 3rd), and includes these details. There will also be a V10, since there are still a couple details still to be added.

Marc, you are a lucky man.

The baby sleeping on your chest is one of the greatest things in a man's life.

Mine is 18 months now and I can already tell you it goes by fast. Yeah, everyone says that... but that's because it really is true.

Enjoy every single moment, my friend.

There are some really good online tutorials on how to use Sketchup. I invested a few hours of time to learn the basis and it has really helped with using sketch up. You can calculate any dimmension you need with the dimension tool by clicking on the first endpoint and then the second end point. if you are using the PDF version obviously you can't do this but its really not that hard to learn the basics of SU and can make using the plans very easy as you can rotate pictures, scale up and down etc.

Agreed! Its a fabulous tool for dissecting a project. Just using the measuring tool, you can effectively do the same thing you might do at a furniture store with tape measure (before the staff notices). With the added advantage of being able to float the thing in mid-air and look under it. :)

With the added advantage of being able to float the thing in mid-air and look under it. :)

What, you can't do that in real life? Power of the mind, dude!

If I am going to shorten my bench to six feet, should I take most or all of the length from between the stretchers, outside the stretchers off each end or equal amount from outside and between the stretchers?

If I am going to shorten my bench to six feet, should I take most or all of the length from between the stretchers, outside the stretchers off each end or equal amount from outside and between the stretchers?

If you are using the Benchcrafted tail vise, you can't take any length off the right end because the tail vise needs almost 20 inches of overhang. Other vises may be different of course.

This is just my opinion, but I would take as much length as possible off the left side (where the leg vise is located) as possible, then take the rest from the middle. The stock overhang on the left is supposed to be 14 3/4", and I think the space to the left of the leg vise is what I'd give up first. I'd take up to 8" off the left end, then the rest out of the middle.

If you are using the Benchcrafted tail vise, you can't take any length off the right end because the tail vise needs almost 20 inches of overhang. Other vises may be different of course.

This is just my opinion, but I would take as much length as possible off the left side (where the leg vise is located) as possible, then take the rest from the middle. The stock overhang on the left is supposed to be 14 3/4", and I think the space to the left of the leg vise is what I'd give up first. I'd take up to 8" off the left end, then the rest out of the middle.

Hey pops (aka Aaron). Think I'm going for 6-3 for top length, which would be 12 inches short of plans. Was thinking of taking all of that from Left of the bench. You had mentioned 8 inches. Care to expand on why you would't take all 12 inches from there? That would leave all base measurements as standard guild build. I'll be going maybe two inches less depth as well. Will take that from back slab. And guess my baee will change in that axis. Tight spaces. Thanks for all your efforts.

Hiya Tom!

There wasn't anything particularly magical about the 8 inches. It was really more about the aesthetics of wanting an overhang on the left to balance out the visual look of the overhang on the right.

If you take 12" off the left overhang, you are only left with 2 3/4" on the left. Further, the leg vis chop is wider than the leg, so the top would be about 1" past the side of the leg vise chop. So I guess it could affect the useability of the leg vise on the left side. I haven't ever seen one squeezed all the way down to the end of a bench like that. The vise would still clamp of course, but there wouldn't be a lot of space around it.

The only other thing I can think of would be tippiness - with a large overhang on the one side the bench may tip more easily. But I bet this would not really be a problem - these things are going to be heavy.

Hope that helps, but I don't know if there is a definitive answer for you.

Hiya Tom!

There wasn't anything particularly magical about the 8 inches. It was really more about the aesthetics of wanting an overhang on the left to balance out the visual look of the overhang on the right.

If you take 12" off the left overhang, you are only left with 2 3/4" on the left. Further, the leg vis chop is wider than the leg, so the top would be about 1" past the side of the leg vise chop. So I guess it could affect the useability of the leg vise on the left side. I haven't ever seen one squeezed all the way down to the end of a bench like that. The vise would still clamp of course, but there wouldn't be a lot of space around it.

The only other thing I can think of would be tippiness - with a large overhang on the one side the bench may tip more easily. But I bet this would not really be a problem - these things are going to be heavy.

Hope that helps, but I don't know if there is a definitive answer for you.

thanks Aaron, I believe you gave me the info I was seeking. Didn't look into the Leg Vise width compared to the Leg.

I believe the widest stance will help stability more than that lost from asymmetry. Seems that your 8" removal from the left is a reasonable number.

I've enjoyed the first few vids of the build. I am back in the shop for small sessions, but won't wrestle large workpieces for a while. See the knee doc on 25th and hope to have sense of when we can do the right knee. Fun times. Have a great weekend.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.