Recommended Posts

Posted

Every year I buy an old plane and fix it up with my kids, one of the best things I ever started. I have been planning on getting a old combination plane for a while now and I have found a very early one that is in great shape but it is the pre-cutter adjustment version. I was wondering if any of you have played around with this and how much of a pain is it to set the cutter depth without the adjustment knob? Any thoughts would be greatly appreciated.

Nate

Posted

I've got one with wheat, one SW era stippled, and one post war II version. The later version is the easiest to adjust of the three but none of them are as easy to adjust as the LV small plow that my friend Chris has. In short, the 45 blades are a pain to increase or decrease depth of cut settngs!!!! Now, once that's done, I've had mostly excellent results, with a few run out issues (on hard, less straight-grained wood).

And for the record; I like the Stanley #45.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.