MTC Posted January 25, 2012 Report Posted January 25, 2012 I am looking to purchase a new dado set - would welcome input on the +/- of your dado and any advice you can give. For several years I have been using a dial dado - but dados are not that clean. thanks in advance. Quote
PaulMarcel Posted January 25, 2012 Report Posted January 25, 2012 I use the Infinity Dadonator; picked it up after reading a few recommendations from KnotScot (a member here). Very clean cuts even with multiple passes (which I usually do for accurate dado sizing using the KM-1). Quote
knotscott Posted January 25, 2012 Report Posted January 25, 2012 I'm still very impressed with the Dadonator...it's hard for me to imagine any dado set at any price being better. It tends to run in the $200 range, which is still less than most of the other premium sets. Watch for periodic price specials. If that's more than you want to spend, take a look at the DeWalt/Delta 7670 stacked set...similar design as the Forrest, great carrying case, nice shim stock, great value at ~ $85...check Cripe (on Ebay). Quote
jmaichel Posted January 25, 2012 Report Posted January 25, 2012 I am selling an Onsrud Dado Stack. New in Box, never used. I have heard they are very nice for the price. Knotscott originally turned me on to them but I never used it and no longer have a table saw. Quote
knotscott Posted January 25, 2012 Report Posted January 25, 2012 I am selling an Onsrud Dado Stack. New in Box, never used. I have heard they are very nice for the price. Knotscott originally turned me on to them but I never used it and no longer have a table saw. He's just about out of stock on these or I would have suggested them...super bargain. German made industrial blades going for dirt cheap in most cases. Which one do you have James? Quote
dwacker Posted January 25, 2012 Report Posted January 25, 2012 I use the forrest dado king. There are alot of cheaper dado sets that do a fine job but some of them cant be sharpened or the services will refuse to sharpen. Check with your sharpening service before buying. Don Quote
CessnaPilotBarry Posted January 25, 2012 Report Posted January 25, 2012 +1 on Dado King... Be aware that the main blades have pointed teeth that leave "batwings" in the dado corners. These teeth create fantastic chip-free cuts with plywood and crosscuts. Some folks find them objectionable, but as my work rarely has visible dado ends, I don't. Quote
jmonroe Posted January 25, 2012 Report Posted January 25, 2012 I recently got a Frued Super Dado as a gift and I love it. Super smooth sides and bottoms with no tearing. Very easy to setup and work with in my SawStop. One of the shims is 3/32 which makes for shim-free setup for most of the plywood I end up with. Quote
jmaichel Posted January 25, 2012 Report Posted January 25, 2012 He's just about out of stock on these or I would have suggested them...super bargain. German made industrial blades going for dirt cheap in most cases. Which one do you have James? Onsrud 8″ Dado Set 12z Outsde 2z Chip’rs x 5 Quote
Eric. Posted January 25, 2012 Report Posted January 25, 2012 +2 on the Forrest Dado King. Great stack, hurts the wallet. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.