MIKWoodworking Posted January 27, 2012 Report Posted January 27, 2012 I am looking at Bandsaws and I am wondering do I get the Grizzly G0555P 14" Ultimate Bandsaw, alone, the Grizzly G0513P 17" Bandsaw, alone, or BOTH!? What are the ups and downs of having one the other or both? Thanks Quote
MIKWoodworking Posted January 27, 2012 Author Report Posted January 27, 2012 Do I use one for resaw and one for curves? To save time changing blades. Also, If I get both do I get the extension riser block for the 14"? Quote
Sac Posted January 27, 2012 Report Posted January 27, 2012 Personally, I would get the 17". Take the time to change the change the blades, and you will be OK. I should put it this way, if you have the need for the 17", then get the 17", if you dont need that much saw, then get the 14". I have the 14" with the riser block, and to be perfecty honest, then it cuts better without the riser block. I want to upgrade at some point, but have a lot of things that are ahead of it. Quote
MIKWoodworking Posted January 27, 2012 Author Report Posted January 27, 2012 Thanks, I will keep that in mind. From a company standpoint, would it make sense, not including money, to buy both? Quote
aengland Posted January 27, 2012 Report Posted January 27, 2012 I had a 12" without a riser block. It cut curves even when I wanted straight cuts. I gave it away and bought a Jet 16" with 10" of cut: it's been a workhorse!!! 5" of timber can wear it down (7 ft long) but more normal usage is a pleasure. If I had the funds (and foresight) I would have bought a quality 14" for 3/8 or smaller blades--dedicated to curves--and a 22" or larger, 3-5 hp (220v) capable of running carbide blade for resawing. Changing blades on my Jet is not hard but it's a tedious process. And, I'd rather use a BS to rip than a TS (got both). I never get kickback with a BS, though the TS is capable of more precision in cuts. 1 Quote
MIKWoodworking Posted January 27, 2012 Author Report Posted January 27, 2012 I am sure it was tough with the 12", I am thinking I will get both the 14" and 17" Quote
Sac Posted January 27, 2012 Report Posted January 27, 2012 Now this is just an idea, but why dont you get the 17", because it would excel at both of those tasks, and see how much you are changing blades? And it really depends on the radius o the curve that you are cutting. You can still cut curves with a 5/8 or 3/4" blade, just not as tight as you could with a 1/2" or less blade. If you are jsut cutting a gentle curve in a table leg or something, you will be amazed what you can do with a few relief cuts and a little patience. Just trying to save you a few bucks. Quote
MIKWoodworking Posted January 27, 2012 Author Report Posted January 27, 2012 I am receiving grant money that has to be used on tools and machinery, so I'm not worried about the money Quote
Sac Posted January 27, 2012 Report Posted January 27, 2012 WHoa..... very cool. Just out of curiosity, what other tools are you getting? Quote
jmaichel Posted January 27, 2012 Report Posted January 27, 2012 I have the G0555P and I think its a great little bandsaw for the price. I added riser block, mobile base and put a 1/2" woodslicer resaw blade on it. However under your circumstances I would not even look at either of those machines but instead jump right into a nicer 17" or 19" Grizzly or go for Laguna 14" SUV bandsaw. Sounds like your and a dilema that most woodworkers would love to be in. Quote
MIKWoodworking Posted January 27, 2012 Author Report Posted January 27, 2012 I am getting a lot of new tools: Drum Sander, Bandsaws, Edge Sander, lots of smaller tools, power tools Quote
Jfitz Posted January 27, 2012 Report Posted January 27, 2012 Thanks, I will keep that in mind. From a company standpoint, would it make sense, not including money, to buy both? I would think that if you are in a production environment, and you do a lot of 'normal' cutting (curves etc) as well as a lot of resawing, then it would make sense to have both...keep the larger one dialed in for resawing, and use the other for the more detailed/normal work. If you don't do a lot of either, then you wouldn't really waste a lot of time by changing blades whenever you used it sp getting just one would be as good. Don't forget it's not just the upfront costs - it's also the cost of floorspace, added blades of every type, and maintenance. If funds are endless and floorspace plentiful? then sure, why not go for both. Quote
dwacker Posted January 27, 2012 Report Posted January 27, 2012 Thanks, I will keep that in mind. From a company standpoint, would it make sense, not including money, to buy both? Fom a production standpoint and longevity it would make more sense to skip both and buy one large saw that can handle all your needs and stand the test of time. The spines on the smaller saws are weak. They build in to much resaw capacity for marketing. If you spent the money on a bigger saw they are easier to work with and dont have the alignment issues. I can put on a small blade and quickly adjust my guides by eye to cut curves or install a wide blade and not use any of the guides, just open them all the way up and forget about them for resawing. Minimax is a good saw that you can get in a smaller size but still have all the benefits of a bigger 24" 5hp saw. Don Quote
MIKWoodworking Posted January 27, 2012 Author Report Posted January 27, 2012 How big do you think I should go? Quote
dwacker Posted January 28, 2012 Report Posted January 28, 2012 As big as you think you will need. Give Minimax a call. Ask for Sam blasco he will bend your ear for awhile. Don Quote
Mike L B Posted January 28, 2012 Report Posted January 28, 2012 www.Minimax-usa.com They make one of the finest bandsaws on the market. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.