Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How long should your random orbit sander last? or death of a tool :)

Featured Replies

Seems like my Porter Cable 333 is on it's way out after 6 years, seems like a decent run for a $40 sander. A year or so ago I replaced the belt in it because it broke, I think that was the beginning of the downhill slide for it.

The vibration has increased a lot since I first got it and the other day I was using it and looked at the pad and noticed one of the screws holding the pad was coming through the sanding disk. Took the sanding disk off and tried to screw it back in and found the screw hole is stripped. Took the pad off and it looks like the disk the pad attaches to is mounted to the shaft with some sort of compression fit rivet so I don't think it's easily replaceable. I don't think it's worthwhile re-tapping the hole and getting a larger screw and the vibration may just blow it out again.

I think it may be time to start shopping for a new one. Let the hunt begin LOL

-Jim

I'd say 6 years is a pretty good run out of a tool that spends its days spinning and vibrating. Now go out and treat yourself to something nice!

I bought a ridgid RO sander, and it has been going strong for 7 years. Ridgid will also send you new parts at no charge under their Lifetime Service Agreement.

  • Author

I bought a ridgid RO sander, and it has been going strong for 7 years. Ridgid will also send you new parts at no charge under their Lifetime Service Agreement.

Hmmm, I didn't know that was still running. I have that plan on my tablesaw and they replaced my front rail last year no questions asked so I can say that the lifetime plan from them is real.

Good thought...

Thanks

-Jim

I have a Fein 6" that I've had for about 8 years sanding wood and alot of fiberglass (which is murder on tools).. Only had to replace the mottor brushes once and finally broke down and got a new hook/look pad ($35).. It's a champ but I keep it clean and greased. It's a pricey little bugger, but it lasts...

I rebuilt my 11 year old 333vs a few months ago, after is started shaking like a dog. For less than $12 and ~ 10 minutes, I replaced the main bearing, and another small part.

They may have changed it, but mine has a screw in the middle of the "pad support". Could your screw have been unintentionally ground into something that looks like a rivet? C clips held the shaft to the bearing.

Before I found how easy my fix was, I had shopped around. My choice on price vs. value was a Bosch ROS20VSK, but I never ended up actually buying it. If your time is money, It's probably better to buy a new sander, but I like to keep stuff out of the landfill if I reasonably can.

  • Author

I rebuilt my 11 year old 333vs a few months ago, after is started shaking like a dog. For less than $12 and ~ 10 minutes, I replaced the main bearing, and another small part.

They may have changed it, but mine has a screw in the middle of the "pad support". Could your screw have been unintentionally ground into something that looks like a rivet? C clips held the shaft to the bearing.

Before I found how easy my fix was, I had shopped around. My choice on price vs. value was a Bosch ROS20VSK, but I never ended up actually buying it. If your time is money, It's probably better to buy a new sander, but I like to keep stuff out of the landfill if I reasonably can.

Have to double check it but it didn't look like a screw and I'm not sure how it could have ground down since it's behind the pad and rotating with it. Unless it's a small hex key or something that got filled with fine sawdust and I just didn't recognize it as such...

I bought a dewalt ROS the other day from the Depot. Runs great. 'Bout $59

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.