Recommended Posts

Posted

I had to cut some 3/4" ply today and as my Dewalt fine cut blade is pretty long in the tooth (slight pun :) ) I figured I'd go pickup a new blade for this.

I am using a DeWalt DW368K that I've had for 7 or 8 years now. I've used this on a ton of stuff from cutting up scraps for the garbage, studs for walls, plywood, stones for a retaining wall (using the proper blade of course :) ) and it has been very good with everything I have thrown at it. It's one of the reasons I have so many DeWalt tools, they just take a beating well.

Did some quick Internet searches and decided this was probably the best I could find locally on a Sunday and was pretty reasonably priced at about $20. This blade is made in Italy and has the red Freud coating on it and has the laser relief cuts in it to keep the blade cool. It is a thin kerf at only .059"

Came home and did a few quick test cuts on some scrap. There was a label on the blade that had to be removed, it came off pretty easily but make sure you remember to do it, I suspect it'd either burn or throw off a clean cut if you left it on.

The first cut I just had a piece of scrap 3/4" and wanted to see how it did with no special bracing, tape, backer boards, or anything else. The underside of the cut was perfectly clean, as good as on my tablesaw with a Forrest WWII blade. The top cut was almost as good with very little chipout. I did a few more test cuts with various different backers, tape, etc. I am very doubtful you could get a better cut quality on the underside of the cut using any sort of backer board, it is just an amazingly fine cut. For the top, using a piece of 1 1/2" masking tape gave the best result. Almost as good as the bottom cut.

Using a straight edge as a guide, setting the depth to be just below the width of the sheet and taping the top of the cut, I was able to get extremely clean cuts with no tear out at all. Razor clean and straight as an arrow. I just spent the last hour or so cutting pieces to size and the blade showed no signs of dulling or that the cut quality was degrading in any way. Previously I would use the circular saw to cut down the ply to sizes I could lug over to the tablesaw for final dimensioning but I think this blade may change that process for me as the cuts are very fine and if I don't have to do the rough cut, it saves time and material.

I am very happy with this blade and it's probably the best $20 I've spent in a long time. If you need a plywood blade, give it a shot, you won't be disappointed.

-Jim

Posted

I got that blade right after I got my new milwaukee circular saw a couple of years ago. When I first used it, I thought something was wrong because it cut so quietly and effortlessly. It cuts that well. I totally agree that with a good straight edge, it cuts as well as I need it to, with little tearout. I don't cut a ton off stuff with a circular saw, but it is holding up very well.

Posted

I got that blade for breaking down some ply - I have not used it yet, but I'm pleased it looks like a good one. My plan is to set up a flip-down rack/table in the garage and use a dedicated circ saw to break down sheets into smaller pieces.

Posted

This is a good blade that will definitely fit a 5/8" TS arbor, but a word of warning is in order. The blade's kerf of 0.059" is narrower than most splitters and riving knives, which means the work piece can bind on the splitter/RK and cause all kinds of issues. Be sure to either remove the splitter or make a custom fit knife before putting this blade on your TS.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined