Andrew Pritchard Posted March 2, 2012 Report Posted March 2, 2012 Has anyone used something like this before: http://www.rockler.com/product.cfm?page=5465 Basically, it's a foot pedal switch - put your foot down and the power comes on, take your foot off - power goes off. Are they a good idea - or do they just seem like a good idea which turns out to be a pain in the backside? If they are a good idea - where can I get one in Canada? Quote
Jim Heinbuch Posted March 2, 2012 Report Posted March 2, 2012 I know that many people use them on scroll saws and really like them. Quote
Andrew Pritchard Posted March 2, 2012 Author Report Posted March 2, 2012 What about situations where you have to be a little more mobile, for example at a jointer or table saw? I just want to be as safe as I can - and being able to cut off the power without needing my hands would be preferable. But as Marc (rightly) points out a couple of times in his videos - if safety equipment isn't convenient, it won't get used. Quote
Jim Heinbuch Posted March 2, 2012 Report Posted March 2, 2012 Because scroll saws use smaller motors and require smaller amperage (sp) the switch. I'm not sure about the bigger stuff, but my guess is that it won't work. I know the switches are available at Busy Bee. Quote
Dave H Posted March 2, 2012 Report Posted March 2, 2012 The switch would be good for IMO a power tool which you could sit at or required very little foot movement. But a table saw requires changeing body positioning and moveing your feet from time to time you wouldn't be able to move one foot while you were stepping on a pedal with the other foot. 1 Quote
CessnaPilotBarry Posted March 2, 2012 Report Posted March 2, 2012 I just bought one for inlay routing. They're handy! Quote
Darnell Hagen Posted March 3, 2012 Report Posted March 3, 2012 They are best used on tools with quick on/off cycles where the operator doesn't move. I wouldn't put one on a TS, but I think they should be standard equipment on drill presses. My favorite is the Allen Bradley 805. 1 Quote
Andrew Pritchard Posted March 3, 2012 Author Report Posted March 3, 2012 I think it would be very handy for one of my routers as it has a toggle on/off switch. The other has push for power switch. Quote
areynoldsre Posted March 4, 2012 Report Posted March 4, 2012 I bought one for my scroll saw. I love it - sometimes but when I have to work on large pieces or need to move around I'll won't use it. I'd might consider it for a router but only if I knew I was going to be sitting down and not having to more. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.