Recommended Posts

Posted

I remember in one of Marc's videos (I can't exactly remember which one), he used a very large diameter spiral pattern bit. It look like it was 1" in diameter. Does anyone remember which video this was in, or the bit itself? I want to upgrade my existing pattern bit to something larger.

Thanks in advance,

Jonathan

==============================================

Posted

Jonathon, you'll have to let me know how you like that. What you're specifically using it for, etc. It looks like a nice tool to add to the collection!

Posted
Jonathon, you'll have to let me know how you like that. What you're specifically using it for, etc. It looks like a nice tool to add to the collection!

Hey Vic! I am making a dining table out of some 1" white oak. It's going to be an oval 90" x 60", and I am concerned with the wood splintering when I route it. I am balking at the cost, $135! Whew! I should probably just get it though. It will come in handy.

Jonathan

==================================================

Posted
Hey Vic! I am making a dining table out of some 1" white oak. It's going to be an oval 90" x 60", and I am concerned with the wood splintering when I route it. I am balking at the cost, $135! Whew! I should probably just get it though. It will come in handy. Jonathan ==================================================

Yea, I'm thinking I'll get it after I set up the router table in the new assembly table.

Posted

Oval top means 2 sections of routing uphill on end grain which will tear out. With a template carefully aligned you could rout from the other side and be going downhill. A less expensive bit with a slight shear angle and a few different size bearings would allow you to trim it down in a few light passes.

That big pattern bit is impressive.

Posted

That bit is awesome! My eyes lit up when I saw it...it is perfect for pattern routing guitar bodies. It is such a pain the the a@% with the traditional bits. One mis read of the grain and your screwed. I am defiantly going to order one.

Posted

It has arrived. It looks like it should be on the arm of a Decepticon or something. I am going to contact William Ng about a recommended RPM for it. I will let you know how it goes.

Jonathan

===========================================

  • 2 weeks later...
Posted

I finally tries out the bit. It was sweet! I made two patterns with some 1/2" MDF, one for the long apron and another for the short. I used the template to draw a pencil line on the apron boards so I could rough out the shape on the bandsaw. I left about a 1/16" of material to remove with the bit. I clamped the pattern onto the boards, took a big gulp, and routed away. No problems at all. The finish was nice and smooth with ZERO tearout. The grain actually was pretty tame compared to what the table top is going to be. I used my DeWalt plunge router at 3 speed. I asked William NG what RPM setting he recommended at he said 13,000.

Jonathan

===============================================

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 52 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined