Recommended Posts

Posted

Hi, im just starting out in the world of "real" woodwork ive always been quite good with my hands and making things and also really love doing it.

Ive been wathching and following marc on TWW and have become addicted' so have decided to turn my garage into a small work shop (somthing ive always wanted to do!)

i was wondering if anyone has any advice on my thoughts of which way to go about it

because of very limited space (as i converted the back end of my garage into a utility room) i was looking at going down the line of benchtop machinery, ive researched and found that the JET BENCHTOP range of tools look quite good, i'm only looking at a bit of cabinetry and small furniture work

Any advice and ideas would be appreciated

Thanx

Posted

Hi there. UK folks are usually good people :))

I would hold off on the jet table and see what your capable of and how far you plan on going with it. A good place to start is salvageable bureaus that are structurally sound. Reinforce it where needed and as a bonus, unless it was a real kook who previously owned it, you get storage drawers to boot.

Then add accordingly. Not trying to sound rude but you guys have junk yards there right? Or salvageable goods yards? Better yet, the salvation army or goodwill.

Wish you luck. This place is good people.

Cheers

Posted

Welcome, Tony! You will find we Colonials a rather agreeable lot.

Before you jump in with pounds and pence, I would suggest you spend a little time researching and thinking about your approach to woodworking. My father was heavy into hand tools and used power tools as a supplement. I went through a heavy power tool phase and now look for any excuse to bring in a hand tool.

The UK and Europe have an abundance of traditional craftsmen still plying their trade. Would that I be so lucky, I would take a few trips around to visit shops to see if any of that appeals to you. You may find you do not want to invest in power tools, and you will certainly discover numerous ingenious and cost-effective work-arounds.

And before you invest in any stationary power tools, you may also find that Festool can fit many of your requirements once you have determined what they might be.

Best of luck to you.

Posted

Thanks for the replies,

I get where your both coming from, but i definatley want to go down the power tool route.

The last project i did was a play house for my son which was built with just hand tools,( not quite FINE woodworking)

if i'd have had my work shop, i think i could have made a better job of it, and from watching various videos on the web i think you can be a lot more presise. maybe its just me ;)

Thanx for your input guys.

Posted

To each their own, I'm sure you know better than anyone else what you are capable of or aspire to be capable of. Perfectiion in ww is. Important and very welcome of criticism if a flaw is found, but imperfections set goals and more importantly imperfections are a great measuring tool to stack yourself against as you hopefully progress. Good luck with all and your in a very helpful for form so ask away.

  • 3 months later...
Posted

Hi Dusty,

I'm not sure what your budget is but I can recommend Record Power gear as it has a 5year warranty and most of it is made in the UK in Sheffield.

Alternatively Axminster have their own brand range of machinery designed in the UK albeit mainly made in South East Asia or China. My experience of Axminster is that the stuff is well made and might need a little tuning to get right but will last for years.

Jet are a Swiss make and also makes terrific gear. The usual suspects such as Makita, Bosch and De Walt are also superb.

If money is no object then the German Festool is the way to go although they don't make larger machinery.

Avoid at all costs most stuff from B&Q (although not all), the Clarke stuff from machine mart, silver line and other cheap brands. You will end up buying twice and filling recyc with scrap metal.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.