Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Incra Miter 1000HD High Definition Miter Gauge

Featured Replies

I notice that Marc uses one of these - but do not see that many positive reviews on it - any comments?

I have an offer currently of $145 seems like a great deal - but want some feedback before buying.

many thanks

If it's new that's a good price, Amazon sells it for $160. If it's used, meh...

I have the SE version, works fine, lasts a long time. You may have to shim a little to get fence square to table but once that's over you're golden. Takes some practice to get used to using the extended scale but it's well worth the learning curve(not steep). Great stop that comes with it.

HTH,

Bill

I not a fancy tool guy but used the one my son in law has on the Incra crosscutt sled thing and was pretty impressed. Might even buy myself one of each this weekend.

Don

  • 2 weeks later...

Surprised if you aren't seeing positive reviews, I friggin' love that thing. Got one for $120 during a Black Friday sale. Spend some time adjusting it, it really works great and a ton of possibilities with jigs. The only groaner about mine was a mistake on my part, I had the fence too far to the right on one cut and the saw cut right through the end of it, but it didn't damage any functionality whatsoever. Even then, I'm sure replacement parts are available.

Got one for $120 during a Black Friday sale.

Ditto. I really like mine.

I've been using Incra miter guages for 11 years. I have several.

I LOVE the angle settings and miter slot adjustments.

I HATE the Incra aluminum fence and stop. I've used far better stops on other brands. I've gone so far as to attach my own disposable fence and clamp-on stops.

Buy the cheapest version and attach your own disposable MDF or cabinet ply fence plate. While you're at it, attach the fence with something you can adjust without tools.

attach your own disposable MDF or cabinet ply fence plate. While you're at it, attach the fence with something you can adjust without tools.

What's your method of doing that, Barry?

What's your method of doing that, Barry?

Two ways...

- If you want it to slide back and forth to infinite settings, rout a tee-slot down the back of the disposable fence. Install toilet bolts in the slot and plastic hand nuts on the threads, or use the Incra nuts with threaded hand studs. When I have the tee-slot bit out, I make a bunch of faces for the guages and replaceable sections of my router table. Pre-groove the slot on the table saw. I do two passes on the saw at different rip settings, to save the time of dado change out.

- If you don't mind selecting positions or don't have a quickly way to make tee slots, drill 1/4" holes spaced to match the metal angle on the Incra. On the face of the fence, use a forstner bit to drill 5/8 or 3/4" holes 1/2 way through the fence. Use 1/4-20 thumb or hand screws to thread through the metal angle, into nuts on the the fence face side. The nuts are recessed into the face.

Tool-free 1/4-20 hardware is in most any hardware store, including the big boxes, or all the usual woodworking suspects. You may need to trim the threaded portion on some items.

I'm always losing the Incra hex driver... :blink: Even when I keep it handy, I found it inconvienient. I tried replacing many of the screws with thumb screws, but some of of the locations don't allow this. For example, the hole that clamps the expandable section of the fence is too close to the bottom to allow a larger bolt head. Other brands allow tool-free operation out of the box.

One other mod I've done to the Incra heads, where needed, is to attach a permanent shim to the face of the fence mount with superglue. That way, I don't have to mess with shims every time I change faces, and there is nothing for a klutz like me to misplace.

I can't say enough good about the steel bits of the Incra 1000 series. I really like the shop-made fences better and would not buy the aluminum fence sections again. Now that I'm using a SawStop, I also have to keep it in the back of my mind that a mistake with an aluminum fence will be more expensive than the other times I've done it.

I have the 1000SE and love it. I like the fence and stops also. I hate the allen head screws for adjustments. Grab the tool every time you want to change it. I don't think so. The picture shows the addition of ratchet bolts, to make it tool free. I also used one for the fence extension lock.

For the price difference, between the SE and HD, I don't see much advantage in the HD, unless you cut a lot of odd angles all the time.

post-5052-0-62595900-1336658925_thumb.jp

I have the SE. I used to have a shop made version (using Incra's basic miter guage) but I like this one for only one reason. Some fittings I like to sneek up on the fit and the flip stop can be micro adjusted using a threaded adjustment allowing incremental cuts in the 1/1000th's range.

Other than that, there are probably others that are equal or better.

I have the 3000SE version and love it. I don't really mind having to use a tool to adjust it but I could get use to not if I was to change some of the screws out.

I'm really happy with this tool.

Bummer about the tool needed to adjust, but what I did is I have a magnetic pegboard rack attached to the base of my cabinet saw, which holds things like my GRR-Rippers and the Incra tool. Since I'm always at the saw when I need to adjust something on the miter gauge, I always have that tool within my reach.

Bummer about the tool needed to adjust, but what I did is I have a magnetic pegboard rack attached to the base of my cabinet saw, which holds things like my GRR-Rippers and the Incra tool. Since I'm always at the saw when I need to adjust something on the miter gauge, I always have that tool within my reach.

I agree...

My Incra wrench is right next to my arbor wrenches, SawStop blade gap wrench, brake gap go / no-go checkers, push blocks, featherboards, rip fence crosscut standoff, narrow strip ripping tools, pencils, sled stops, sled stop and L fence clamps... Right at my finger tips... :D

i bought the 1000HD and like it a lot. it has been rock solid and highly accurate with no slop due to the adjustments in the bar. all the reviews i read when i bought mine were really good. not sure where you are reading the negatives, but it has been a positive experience for me. $145 is a good price. i think rockler had them for $120 around black friday or Christmas. that was a steal.

I have the 1000SE and love it. I like the fence and stops also. I hate the allen head screws for adjustments. Grab the tool every time you want to change it. I don't think so. The picture shows the addition of ratchet bolts, to make it tool free. I also used one for the fence extension lock.

For the price difference, between the SE and HD, I don't see much advantage in the HD, unless you cut a lot of odd angles all the time.

I have the 1000SE and love it. I like the fence and stops also. I hate the allen head screws for adjustments. Grab the tool every time you want to change it. I don't think so. The picture shows the addition of ratchet bolts, to make it tool free. I also used one for the fence extension lock.

For the price difference, between the SE and HD, I don't see much advantage in the HD, unless you cut a lot of odd angles all the time.

Wrench? I need no stinkin wrench!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.