Evad Posted June 2, 2012 Report Posted June 2, 2012 I'm looking to get into furniture making but I have almost no space, skills, or tools to speak of. I have, however, watched 50 videos online about it, that makes me an expert right? I would rather spend a little more and get tools that last; That said, I'm looking to go minimalist here - my primary motivation is to gain another skill, as I consider myself something of a collector of random skills. I want to get what I need to start to get my hands dirty, and by then I'll know what else I want. I have a first piece in mind (a small contemporary sideboard) that seems simple enough. What makes/models would you recommend for the bare essentials? Quote
Tony Wilkins Posted June 2, 2012 Report Posted June 2, 2012 As somebody just ahead in the journey of going down this road I'd recommend reading three books first. First and most definite is "The Anarchist Tool Chest" By Christopher Schwarz, I think the DVD that comes with it has more brand recommendations. Go to Lost Art Press to order it. The next two are both good: "The New Traditional Woodworker" by Jim Toplin and "Made by Hand" by Tom Fidgen. These are good resources to get you where you need to be. I wish I had got Schwarz' book before I bought my first things. Good Luck. 1 Quote
JohnnyNoName Posted June 2, 2012 Report Posted June 2, 2012 Tony is dead-on. I have all three and I would recommend them to start out with, with "The Anarchist Tool Chest" being at the top. The other two are good, but I think that Schwarz's book is just about perfect. The DVD helps if you just want to know which brands, but the book spells out what to look for in the tools themselves if you don't care about which brand so much. Good luck! Jonathan ================================================ Quote
jmaichel Posted June 2, 2012 Report Posted June 2, 2012 I would add The Essential Woodworker to that list. At some point you are going to have to pick up some tools and just start working some wood. This book provides some very good exercises to help develop hand tool skills. 1 Quote
Eric. Posted June 2, 2012 Report Posted June 2, 2012 The biggest problem starting off "bare essentials minimalist," in my opinion, is that you have to mill your stock square somehow. This can be extremely frustrating to a novice with only hand tools. And what can be even more frustrating is trying to build a project with pieces that haven't been properly milled. So with that in mind, I think it's wise to start at the very beginning, and if you're dead-set on going purely Neanderthal, the first tools I would buy would be a couple saws and a few milling planes, probably a scrub, jack, and jointer. Then practice practice practice milling until you can get boards dead flat and square. Then, and only then, move on to joinery. Buy a marking gauge, a dovetail saw, a block plane, and a set of chisels. Then practice practice practice until you can make nicely-fitting joints. Then, and only then, buy some clamps and glue, and build a few small and basic projects. As you develop your skills and seek more elaborate projects, you'll begin to fill in your tool collection slowly but surely, and before you know it you'll have another random skill under your belt and a nice set of tools. Long story short, start at the beginning. Good luck and have fun. Quote
Tony Wilkins Posted June 2, 2012 Report Posted June 2, 2012 Good advice Eric1978. That's inadvertently where I've found myself though I'm still waiting for my jack and trying plane to arrive. And I wish I had a shooting board right now. Quote
jab73180 Posted June 2, 2012 Report Posted June 2, 2012 In response to the brand names, i would just find some old stanley planes on ebay. Thats what i have been doing and been happy. I found a newer disston saw at my grams and bought a nice older disston rip saw on ebay. You can get some nice tools from lie nielson but i would go cheaper until you find out if you like working the wood. Quote
JohnnyNoName Posted June 4, 2012 Report Posted June 4, 2012 Something I forgot to mention... In the Anarchists Tool Chest, Schwarz also lists good places to buy used tools. One of the places that I have had success was Hyperkitten. I have purchased a Stanley #3, a Millers Falls Egg Beater drill, and a drawknife from an unknown maker. I have been very happy with what Josh Clark has sold me. Jonathan ========================================== Quote
JohnnyNoName Posted June 4, 2012 Report Posted June 4, 2012 Another used tool recommendation is the Supertool newsletter: http://www.supertool.com/forsale/june2012.html Jonathan =============================== Quote
Bob Rozaieski Posted June 4, 2012 Report Posted June 4, 2012 What do you want to build? Furniture is not specific enough. If you want to build Windsor chairs, the bare essentials tool kit will be vastly different than if you want to build a Newport block front chest or a studio style piece. I'd suggest picking a specific project first before you decide what tools you need. Quote
JMort847 Posted July 6, 2012 Report Posted July 6, 2012 For solid, basic knowledge, Tony and James have given you a great list of resources. Bob is right about deciding what kind of furniture you want to build, as it will determine what you need. Since your primary motivation is skill building, I would consider working on some basic projects first to get comfortable/more proficient with hand tools before taking on a big project. It will lead to a more rewarding and pleasurable experience, and cuts down on the scrap wood pile... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.