Recommended Posts

Posted

Here is a table that I have been working on for a while now. The tops are from a walnut crotch and the legs are made from ash.

BEszj.jpg

A while back I posted a thread in the general forum about filling a cut in the end of the slab. Originally I wanted to use ebony, or something very dark, but I couldn't source what I wanted. Instead I laminated some maple veneer and crammed it in there. Gluing it in place was pretty difficult but I am happy with the results.

R6rMg.jpg

A few months back I made a smaller table with a piece from the same walnut crotch as a prototype. Here is mama and baby.

qmWn5.jpg

jiheP.jpg

My favorite thing about this table is the figuring in the top slab, I think it is beautiful.

KsNxB.jpg

Originally I had completely filled the large void in the top with epoxy, but I didnt like the way it turned out so I removed it.

I welcome all comments and critisms. Thanks for looking.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.