00101 Posted June 25, 2012 Report Posted June 25, 2012 Just got a used Delata Model 28-475X with a mobile base, riser block, fence, like 8 blades, and a Delta dust collector for $650 So in order to start playing with my new toy, what is the procedure for getting this thing in tip-top shape? Quote
STL Woodguy Posted June 25, 2012 Report Posted June 25, 2012 I think the bandsaw setup video from The Wood Whisperer pretty much covers the initial bases: http://www.thewoodwhisperer.com/videos/bandsaw-setup-tuneup/ Quote
CessnaPilotBarry Posted June 26, 2012 Report Posted June 26, 2012 I have the same saw, and have had great results for many years. If you have questions after watching the video, PM me. Quote
STL Woodguy Posted June 27, 2012 Report Posted June 27, 2012 Some more good video links I forgot I had in my bookmarks: Quote
00101 Posted July 10, 2012 Author Report Posted July 10, 2012 Sorry to kind of revive this dead topic, but while attempting my first resaw operation, this happened. The cut started out fine, but then got more and more curved until I stopped. Looking back I'm guessing because of the blade being bent like that, that it was rubbing against the lower blade guide which would explain why more or less the entire saw was hot (even the doors to the wheel housing!) and it was scorching so much. Since getting the saw I have not touched the blade guides, so those may be a problem area. So how exactly did this happen and how do I fix it? Quote
Sac Posted July 10, 2012 Report Posted July 10, 2012 A couple of things could be to blame for that. The guides need to be adjusted. you dont need a lot of space between the blade and the guide. A dollar bill folded in half should be good. Another thing that could have cause this is blade tension. Make sure that you have the guide set to the height that you need it. About a 1/4-1/2" above the piece that you are cutting or resawing. Then tighten the blade till you only get about 1/4" of deflection in the blade. There are a couple of ways to tension a blade, that way has worked for me. And last, make sure that you have a sharp blade. a dull blade can make resawing a painful process. Most people will recommend a 3-4 TPI blade. I use a 5/8" Laguna Shear Force blade. Works pretty well. Others say that the 1/2" Woodslicer is a good choice. I have not used it before, just heard good things. Hope this helps. Quote
tdale51@yahoo.com Posted July 16, 2012 Report Posted July 16, 2012 I've used the 1/2 woodslicer that Sac is referring to. It gives good results even to a novice such as myself. My only complaint is it seems to dull fairly quickly. I think that's the nature of most non carbide blades though. Quote
HuxleyWood Posted July 16, 2012 Report Posted July 16, 2012 I've used the 1/2 woodslicer that Sac is referring to. It gives good results even to a novice such as myself. My only complaint is it seems to dull fairly quickly. I think that's the nature of most non carbide blades though. The Woodslicer and all the clones made with Atlanta Sharptech stock are spring steel blades with impuse hardedened teeth. This means they are initially very sharp but dull quicker than standard carbon blades. Their benefits are thin gauge (good for small saws), thin kerf (save wood) and nice finish (due to lack of tooth set). Quote
croessler Posted July 24, 2012 Report Posted July 24, 2012 I did two things that vastly improved my re-sawing:Properly setup the guides with relation to the bladeStarted using a properly tensioned Timberwolf 3/4" 3TPI Re-saw blade After gaining a few years experience with that setup I recently upgraded to the Carter Bearing guides which helped even more..... I used to have the old style blocks and thrust bearing guides. EDIT: I just thought I would add that my saw is a Jet14" with the 6" Riser block. Quote
jbs550 Posted January 2, 2013 Report Posted January 2, 2013 Sorry to kind of revive this dead topic, but while attempting my first resaw operation, this happened. The cut started out fine, but then got more and more curved until I stopped. Looking back I'm guessing because of the blade being bent like that, that it was rubbing against the lower blade guide which would explain why more or less the entire saw was hot (even the doors to the wheel housing!) and it was scorching so much. Since getting the saw I have not touched the blade guides, so those may be a problem area. So how exactly did this happen and how do I fix it? Curious if you got your issues fixed? I finally started doing some resawing, and am having the same issues. Don't think it is simply an issue of feed rate either. My blade may have dulled, but I am using a wood slicer blade that is not very old. I have also spent a bunch of time trying to make sure it is set up appropriately, but never really sure. if you fixed yours and have any suggestions, I would love to hear them. jbs550@me.com Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.