nateswoodworks Posted July 16, 2012 Report Posted July 16, 2012 After loving my standard Narex chisels for so long I bought some of their new Premium chisels and so far I really like them with one exception, the handles. Not only are they ugly but they don't fit my hands very well and I like the personal touch of self made chisel handles. On other handles I used copper from plumbing fittings for the furrules but with the wood I plan to use (mystery wood from Japan I have been saving for many years) I think brass would look much better. Lee Valley has some but they look pretty thin as is the brass tubing I can get from the hobby store I take my kids to. I know it doesn't have to be very thick but I think it looks better with thicker brass. Packard Woodworks has some that looks nice but I thought I would ask you all first. Also I have made handles for my 750 Stanley socket style chisles that were my wifes late grandfathers and screwdriver handles but this will be my first tang handle, assuming they are tang anyways, I have read a little on this but any guidance on the best process would be greatly appreciated. Nate Quote
nateswoodworks Posted July 16, 2012 Author Report Posted July 16, 2012 PlaneBill over at LJ sent me the link below. After looking at it I remember seeing it before. I think this is the route I am going to take, it gives that classy bigger brass look that will go great with the wood I am planning on. I am still very open to suggestions on hints and techniques of doing the tang style handles so if you have any please share! http://www.wkfinetools.com/contrib/jThompson/restore/nutFerrule/nutFerrule3.asp Quote
rmac Posted July 16, 2012 Report Posted July 16, 2012 Brass compression nuts make great ferrules, especially if you take the trouble to knock off the corners so they're cylindrical when you're done. -- Russ Quote
duckkisser Posted July 17, 2012 Report Posted July 17, 2012 i bought some napkin rings at a garage sale that i plan on using nice brass color with flowers ingrained into the metal. Quote
JerrySats Posted July 17, 2012 Report Posted July 17, 2012 Having those furreals from Leevalley your referring too I will verify yes they are thin . I would use the plumbing fitting like it's been suggested above . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.