jimbobspants Posted July 23, 2012 Report Posted July 23, 2012 I'm right-handed, have tendonitis in my right hand and a Porter Cable 5" random orbital sander. Hilarity ensues. Any advice? A brace of some kind or a different sander? Whiskey? I'm open to all suggestions. Thanks. Quote
Vic Posted July 23, 2012 Report Posted July 23, 2012 Are you using any kind of boom arm? I found I don't have near the problems if I use the boom arm. Mine is just a simple bracket screwed into the ceiling. I hang a rope off that and tie up my vac hose. I still hate sanding and have moved more into planes and card scrapers for the vast majority of what I used to sand. Quote
walnut_weasel Posted July 23, 2012 Report Posted July 23, 2012 I have the same problem but with a lot more than just when sanding. The only cure for tendinitis is rest unfortunately. When I get done in the shop I ice then compress it and sleep with a brace on. I also try to rest my hand as often as I can while working. Quote
Trip Posted July 23, 2012 Report Posted July 23, 2012 i switched from PC to festool and mirka sanders. there is far less stress on wrist with these higher-quality sanders... also, the festool boom arm kit for their CT vac systems also helps lower stress on your lower arm. Quote
jimbobspants Posted July 23, 2012 Author Report Posted July 23, 2012 Thanks for the advice, everyone. While I can't justify the expense of a Festool anything, I can certainly try hanging the vac hose from the ceiling and the compression brace. Thanks again. Quote
dtrust Posted July 23, 2012 Report Posted July 23, 2012 If the issue is the vibration from the sander, the Rockwell Vibrafree ROS has almost no vibration transfered to your hand. I have the Craftsman version (same exact product) and although it isn't a Festool, it works well. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.