Recommended Posts

Posted

Marc - Since you have just about every Festool product out there, which would you recommend as the first one to buy? Is there any Festool product that has enabled or made woodworking easier for you, than other equivalent branded tools?

I know the answer could be "It depends" based on tools needs (do I need a track saw? Do I need a sander), but suppose someone had all those tools and was looking to switch brands. Not saying I am. Really just curious to know.

Adam

Posted

Can't disagree with the Domino. When I had to make this same decision, it was the TS55 + MFT combo. That opened a lot of doors for me in sheet goods procession. But now I would say the Domino is the biggest game-changer.

Posted

I echo the Dominos. I wanted to never "go down the Festool rabbit hole", but the Dominos are truly game changers. I bought the DF500 and will pick up the XL700 this year. Nothing has the dust control or ability to route a mortise as fast.

(null)

  • Like 1
Posted

My first Festool purchase was a DX90, quickly followed by a TS55 and Vac combo. I didn't have a sander or way of dealing with sheet goods so they offered me a capability that I didn't have.

If you already have stuff that does those tasks I'd look to something that changes the way you work, like a Domino.

Posted

My first was a sander and a vac. Followed by the TS55, another sander, and the boom arm. A router and a Domino and I think that I am good for a bit. I say that now, but I am sure that I will prob add a few things on later. It really is like crack.

Posted

What about apart from a domino ?

Outside of the Dominos, you're talking about how much better is it at performing an operation that another tool does. That's less cut and dry. I get fine results from my tablesaw, my sliding compound miter saw, my Porter Cable ROS sanders, when using quality abrasives and hooked to dust collection and there are other less expensive routers that I've heard some prefer to Festool, due to visibility issues. I'm thinking of the DW621 for my next plunge router. I have a Triton, which has dust collection that keep fine dust out of the air. That is the biggest issue for me with this set of tooling you're referencing that is outside of the large leap that the Dominos are above any other tenoning device or jig.

Posted

Of those that I have, you'd likely get a roundhouse kick to the head if you tried to take the Domino DF-500 from me. The others have non-green counterparts, but there really isn't one for the Domino. I say DF-500 because I do use smaller Dominos that the XL-700 cannot do and the few times I need the larger Domino of the XL-700, I could use simple techniques to make oversized DF-500 tenons.

Posted

I believe this thoroughly depends on whether you are starting out as a woodworker or have a shop in place already. If it's the latter, then this really becomes a tough question... I mean, what do you do now and what MORE do you wish to do in the future?

I can't say anything for people who already have a shop. I just started out a few weeks ago and the first thing I bought was a OF 1400. I wanted to make a sword scabbard and after trying to chisel out the indentation for the blade, I almost ran to my closest Festool dealer.

Next came the shop vac because it was a pain to always tape the household vac to the router. And two days ago, I got myself the TS 55, because how much can you possibly do if you can't get the wood down to size?

Next will be the MFT/3, because I have already had minor mishaps because I was unable to clamp down/position the tool in a way that was stable and safe.

After that, I might build myself a router table for the OF... and if I can, it will be a combination table that can also be a table saw using the TS 55. But that one's a biggie and I'm not sure I dare touch that project this early in my 'career' ;).

Posted

All Festoys will be 'rubbish' without a vac so I would suggest any tool you need for a job WITH a Festool CT26 vacuum.

Mine was an OF1400 router and if I got to do it again I'd rather go with the 1010 first and if run out of raw power get a 2200 to complement it and put into the CMS when not in free hand use.

You are not even supposed to run the Domino without active DC.

Posted

All Festoys will be 'rubbish' without a vac so I would suggest any tool you need for a job WITH a Festool CT26 vacuum.

Mine was an OF1400 router and if I got to do it again I'd rather go with the 1010 first and if run out of raw power get a 2200 to complement it and put into the CMS when not in free hand use.

You are not even supposed to run the Domino without active DC.

I run the Domino connected to my cyclone system. The advantage of the Festool vac systems come with the sanders and being able to easily vary the suction.

Posted

I say DF-500 because I do use smaller Dominos that the XL-700 cannot do and the few times I need the larger Domino of the XL-700, I could use simple techniques to make oversized DF-500 tenons.

Is the general consensus that the smaller Domino machine is the one to get?

Cheers,

Brian

Posted

Is the general consensus that the smaller Domino machine is the one to get?

Cheers,

Brian

I would think so. you can do a lot more with smaller stuff with the little one. If you make a lot of doors, then get the big one. Or a lot of big stuff in general.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined