Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

opinion of this sander for 25 bucks?

Featured Replies

DSCN0176.jpg

DSCN0175.jpg

DSCN0172.jpg

the motor on it is 1/3 hp motor that turns around 1700 rpms it runs smoothly and i think that it might be home made because i cant find a brand on it. it rock solid though so i plan on upgrading it a bit with a more powerfull motor the bearing are all sound it will make a good sanding frame just would like it to be a little more powerfull. the sand paper can be ajusted for several different lengths anything from 4 by 50-4 by 65

When buying second hand tools, the first question I always ask myself is: Do I really need this? Does it fill a hole in my tools I actually really need?

The second question is: Why is the seller selling this? Is it because he can't get (in this instance) the belts for it? It sounds like this isn't a particular problem in this case. I could do with a disc sander, and an spindle sander, but that's a different story.

$25 sounds like a really good deal. Not my cup of tea right now - I don't have a need right now for a sander. I have plenty of other things to buy.

  • Author

the person selling it was a old women who was going to have to be put in a home so they needed to get rid of it. and i have hardly any tools so i need all. i got this because of how well built it is and simple it is. if it breaks i can replace the parts easily.

  • Author

think i would be able to mount a more powerfull motor like a 3/4-1 hp motor on this? or would it be a realy bad idea. dont know as i have never done something like that.

I would get a belt and try it out first. It might be fine just as it sits. i have a shopfox edge sander with a 1/3 hp motor and it does just fine.

418EXhZin-L._SL500_AA300_.jpg

  • Author

ya im going to. 25 dollers seemed like a good price for a machine frame that i can adapt but if it works fine with the motor on it why mess with good thing. (ya right) spent the night thinking about some kind of jig to build onto it so that i can use the large table to hone my lathe tools. with the wrap around table on it ill be able to slide my tools around the side of the sanding belt so i can sarpen my skews and curved edge scrapers. razor sharp is always nice. wish it took 6 inch belts but hey 4 is still good. :) (i think that is the curse of a do it yourselfer you always want better machine) thinking i might looking to gets some drums that are longer and cut off part of the table to make it so that a 6 inch belt can fit onto it. but that might be down the road a bit.

  • Author

oh it works it works very smoothly just want to adapt it for lathe tools honeing other then that

You could also make your own drums for the sanding belts. I had to do it to mine when the bronze bushings wore out on the idler drum. I used a piece of non metallic conduit and cut 2 plywood inserts that were a press fit and the bearings from an old dewalt sawzall that wasn't worth repairing. I then used an old torn belt that I reduced to about 1" in width to turn the drum so I could sand a slight taper on the top and bottom of the drum to assist in tracking.

post-202-0-64244400-1344179456_thumb.jpg

As for sharpening lathe tools maybe something like this can be adapted. I made it myself from plans I found on the internet.

post-202-0-79266200-1344179540_thumb.jpg

This sets the amount the tool extends out of the jig so you can consistently get the same angle on the tool.

post-202-0-57513200-1344179581_thumb.jpg

  • Author

nice alan i have a woverine guide.........wish i had saved my money and just made one.

have you tried double bevling your tools i hear you can get a tighter curve when your doing beads with a finger nail gouge

here is some decorating tools and a E-Z type tool that i made

here is the best deal i found on blades http://globaltooling...ert-knives.html i turn daily for a few hours and one blade lasted me the better part of a year. the video for the elf like decorating tool is gone now but all it is a 1/4 shaft bering and brass bearing toob and a ball bering.

thought about take a round piece of wood cut a slot in it and then wrap sandpaper around the round wood put a plug in the slot and then i have a stationary sander that i can sand down projects on. thinking of doing that for my inlay work to grind down the metal and stone inlay material. it basicly looks like a horizontal drum sander. if i make it long enough i can put several grits of sandpaer down the length of it.

alan if you want a fun easy project i made 4 of these hoping to sell them only took a hour each and cost me 1$

ANY belt type sander that works is worth $25. Large rollers, pillar block bearings...it looks rock solid. Could be home made - still definitely worth it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.