Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Plywood Touch Up: is there a solution?

Featured Replies

So without going into the details, I ended up using iron-on edge banding to cover up the plywood edges on a project table I'm making for my wife. The plywood is high quality cherry and so is the edge banding but I don't normally work with this stuff so I'm not sure how to fix my problem. Because I have small children, I wanted to break the edges - especially the corners. I knew I'd break through the veneer on the corners but it's better than sharp edges. See the attached pictures for illustration.

I'm wondering if there is something I can use to touch up the corners before applying a finish (stain pen??). I'd really prefer to NOT buy a whole can of something just to touch up these corners but I'm quite a novice when it comes to finishing.

Any help is appreciated.

-Shawn

post-90-0-66245700-1349230740_thumb.jpg

post-90-0-79134000-1349230757_thumb.jpg

The deluxe fix would be to trim 1/4" off of all the edges and apply some solid edge banding. That's what I would do if this was an important piece that I wanted to look really good. If that's impossible for some reason, or if you just don't want to go to all that work, then you're stuck with trying to hide the goofs somehow. I don't have any good suggestions there, except that it would be a good idea to practice whatever you decide to try on scraps before you attack the actual project.

-- Russ

Are you applying a stain of any kind?

I was thinking gel stain when I saw your question to him Paul.

If you practice on scraps first you can lightly stain the sand thru with a small artist brush, let that dry overnight, then stain the whole thing and proceed as you normally do. That sand thru is in the face veneer. It happens to us all. You just have to be very cautious with ply and edgeband veneers.

  • Author

Thanks guys - this is great input.

I was not going to stain anything, but that does seem like a good option now - especially with an artist brush. My plan was just to put a wiping vanish on the ply as it's the top to a project table for my wife (she found the idea here). Can you guys recommend brands and/or colors? Sorry to be a pain, but this is really not my area of expertise.

And Russ, solid wood edge banding is my first choice but it's not in the cards on this project.I have to finish this up and move on to another pressing matter. With my tablesaw out of commission, I don't have a good way to rip 5 ft. long boards for the solid edge banding.

Thanks,

Shawn

I've used General Finishes Gel Stains on a commission I had recently for 5 dressers each in a different color. If I remember right there are 12 or 14 colors available. Gel stains do somewhat obscure the grain (I used them on poplar so I wanted to build color in three coats of stain over variegated wood tones), but that will be a benefit on your through sanded edges. Their stain also has some poly in it so not only are you staining, you're also protecting. When you're done you can finish with a clear coat. You don't need to use their Gel Coat for the final finish like they say. I used Arm-r-Seal because I already had it and had no problems.

I've used the artist brush on almost every project I do. It always seems as if there is one spot that I don't like for one reason or another. I just use the closest stain color I have to the existing color layer. In your case, a pecan color looks like it may work for you. Like Wdwerker said, paint it on, let it dry overnight then topcoat. I would add that I work the stain a little too. Meaning, that once it starts to set (dry), I use a clean cotton cloth and lightly wipe and blend it with the surrounding area so there is not a strong stain line.

Tim has it right, you just have to play with it . While its drying a little attention , wipe this dark section a bit, leave a little more here to cover the sand thru and let it dry overnight. Then be gentle with those areas when you put the first couple of coats on not to disturb the pigments, sand between coats very carefully and gently. Best results are from practice and careful steps forward. Speed and impatience are the enemy!

Cut the corner off completely and then Edge band the new face. What I mean is instead of a 90° angle make it 45 at the corner.

This accomplishes two things: First it solves your sand through problem, and second it eliminates the sharp corner entirely for small children.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.