pghmyn Posted October 5, 2012 Report Posted October 5, 2012 I know I just made a topic about a new table saw, but I think I could wait on that. I have watched videos and read reviews about the Festool TS 55, and really want one. But, my question is, what else is it really good for other than sheet goods? Does this product really stand out on other applications? Also, if it came down to it, would I be able to use the saw without the track? $550.00 is a lot to spend on a saw, but after a couple more projects it could "pay for itself" in a way. Thanks for your insight Quote
Scott Seganti Posted October 6, 2012 Report Posted October 6, 2012 I mainly use my TS55 for cutting down sheet goods, but I do use it in other applications as well. Yes you can use it without the track. If you're making cuts that don't need to be overly accurate, free handing it is a good quick way to go... but one of the biggest advantages to this saw is the ease of use and accuracy gained by using the track. The other huge advantage is the dust collection. I am still amazed at how well the TS55 handles saw dust. Some food for thought... you need to think about are the accessories associated with the track. The main accessory that you'll need are clamps to secure the track to your work piece. The tracks and clamps are not cheap. Quote
pghmyn Posted October 6, 2012 Author Report Posted October 6, 2012 I mainly use my TS55 for cutting down sheet goods, but I do use it in other applications as well. Yes you can use it without the track. If you're making cuts that don't need to be overly accurate, free handing it is a good quick way to go... but one of the biggest advantages to this saw is the ease of use and accuracy gained by using the track. The other huge advantage is the dust collection. I am still amazed at how well the TS55 handles saw dust. Some food for thought... you need to think about are the accessories associated with the track. The main accessory that you'll need are clamps to secure the track to your work piece. The tracks and clamps are not cheap. Are the clamps necessary? I thought the tracks had something of rubber on the bottom to hold it in place. If I did use clamps, wouldn't quick-set clamps work as well? Something with a nice rubber pad to not damage the track. Quote
PaulMarcel Posted October 6, 2012 Report Posted October 6, 2012 It's pretty rare for me to use the clamps on the track with the TS-75. In most of the cases when I did use them, I likely could have gotten away with normal quick-set clamps; when you get close to one that's in the way, pop it off. The TS-55/75 is the best thing going for sheet goods. Cross-cutting boards is more easily done on the MFT since it pins the guide rail in two places and bridges over the open areas; simply placing a guiderail on a relatively narrow board to cut would require using clamps and having the end over the edge of a table. The MFT makes working with the saw much nicer for smaller stock; it has about a 27" 'crosscut' capacity. If an MFT doesn't interest you, Qwas rail dogs can take the place of the MFT's guide rail if you have 20mm holes drilled in a bench. I have an MFT but also have a long bench I made that has an array of 20mm holes for use with Qwas dogs and rail dogs. With it, I can easily crosscut large pieces of ply square (square because I was careful drilling holes then 'qualified' certain holes and marked out the bad ones). It's easier to see how those work than me babbling about them so look at this video I made; in the video playlist for this blog entry on the MFT, it's the third video on 'Qwasness'. I have no affiliation with Qwas stuff other than having bought a bunch of it. Quote
jmaichel Posted October 6, 2012 Report Posted October 6, 2012 Get the table saw first! I got a TS55 first thinking it could replace a table saw and it can, one you get other accessories to go with it. I also think you need to add another guide rail at the same time. I also found that the ts55 does not rip hardwood that well, even with a rip blade. For what it's worth I ended up selling my TS55 with the intention of buying a table saw but bought a road bike instead until I figure out my next few tool purchases. Although after just watching Marc's bookcase series, I was kind of kicking myself for getting rid of the ts55 but if I were to buy another tracksaw I would spend the extra money and just get the 75 instead. Quote
STL Woodguy Posted October 6, 2012 Report Posted October 6, 2012 Some will swear up and down that the TS55/75 (particularly combined with MFT) makes the table saw useless, and I might agree if onsite cabinetry is your line of work. But in my opinion, it *compliments* the table saw under certain circumstances. My shop is small and is a shared laundry room at that, big sheet goods are impossible because no matter how I orient the saw in the room, I don't have enough clearance either forward or backwards (and my saw remains fairly stationary in the center at that). So the TS55 allows me to do it, and even if it didn't, I could take the sheet goods into another room or go outdoors if needed. Yes, the TS55 is mostly used for sheet goods, but I've also used it as a backup to the table saw to cut hardwoods of appropriate depth, namely when I have my table saw dialed in for a particular cut that I don't want to lose adjustment on. The only thing I wished the TS saws could do is cut deeper (than even the TS75). I'm not so trusting of the rubber strips on the track, that has screwed me on more than one occasion when the track started slipping (strips were clean). Depends on the surface, depends on the tool being run on the track (like routing). Plywood seems to hold the grip fine. Anything slicker like MDF I would always clamp down. Quote
fransikaner Posted October 6, 2012 Report Posted October 6, 2012 In addition to sheet goods, I use the 55 to joint edges of 4/4 stock when I don't feel like going the jointer-planer route. Quote
pghmyn Posted October 6, 2012 Author Report Posted October 6, 2012 I wouldn't want to replace a table saw, because I use the one I have an awful lot. But, it's really up in the air which is more important. The table saw is pretty old, and it cuts fairly well most of the time. Very finicky sometimes. I just think the TS 55 would be a good addition to the table saw that I have. When I save the money again, I would get the table saw next. At least that's my thinking. Quote
Mister Pants Posted October 9, 2012 Report Posted October 9, 2012 Interesting topic, and as I found myself yelling at my crappy old skillsaw yesterday (it was a cheapy). I'm starting to think about replacing it. I have been thinking of a track saw, but have a few questions if someone with one can help me out. 1: For breaking down sheet goods, how much better is a TS-55 than a regular circular saw with one of the commercially available straight edges (Bora etc.), assuming one doesn't have the MFT (space is becoming a premium) 2. I've used a TS-55 once before, during a class at the local Woodcraft while we were breaking down boards, and the power cable came unplugged twice in a couple of cuts. This was the class saw that, I'm sure gets a lot of abuse, but does the detachable cord have a tendency to come loose? 3. How is the stock blade? From what I can tell they're not the standard 7.25" blade size how readily available are replacements, are there readily available replacements from other brands? 4. Given that it's basically a circular saw is the dust collection system a needed extra expense for it, or just a nice to have (which I agree would be a nice to have, but also another several hundred ). 5. Oh and what are the main practical differences between the 55 and 75 (beyond what I can read in the specs that is ). Quote
STL Woodguy Posted October 9, 2012 Report Posted October 9, 2012 1: For breaking down sheet goods, how much better is a TS-55 than a regular circular saw with one of the commercially available straight edges (Bora etc.), assuming one doesn't have the MFT (space is becoming a premium) Straight edges work fine, but I personally wouldn't want to cut a bunch of stuff that way. The track on a tracksaw should have a zero clearance cut making it easy to line up, versus a straightedge + saw which had offset to deal with. 2. I've used a TS-55 once before, during a class at the local Woodcraft while we were breaking down boards, and the power cable came unplugged twice in a couple of cuts. This was the class saw that, I'm sure gets a lot of abuse, but does the detachable cord have a tendency to come loose? The top mistake people overlook on Festool cords is not twisting the end into place when attached. It should not come off when it's twisted on. Unless that cord at WoodCraft was pooched or worn. 3. How is the stock blade? From what I can tell they're not the standard 7.25" blade size how readily available are replacements, are there readily available replacements from other brands? Surprisingly good, little to no tearout on plywood. Getting a decent blade out of the box on a power tool is rare, so consider that when evaluating cost. 4. Given that it's basically a circular saw is the dust collection system a needed extra expense for it, or just a nice to have (which I agree would be a nice to have, but also another several hundred ). I consider most Festool stuff 'nice-to-have,' lesser tools will still get the job done. Doesn't mean I wouldn't run out and replace my stuff if I had to, though. Correction: I just realized I misread one of your questions completely wrong. While the dust collection is not a necessity, that really is one of the selling points of going with Festool. Otherwise if you have no plans for that or the Festool ecosystem, you could look at other tracksaws. 5. Oh and what are the main practical differences between the 55 and 75 (beyond what I can read in the specs that is ). Power and cutting depth, that's primarily it in a nutshell. Lower tooth count on TS75. Quote
Mister Pants Posted October 10, 2012 Report Posted October 10, 2012 Thanks Ends. Yeah some of the other stuff would be nice, but budget-wise I can't really see myself replacing other quality tools for them. I would like a Domino at some point, but that would be more on a nice to have side right now. With regards to #2 that most likely explains it. I expect it was us neophytes who weren't familiar with it who put the plug in incorrectly. With regards to #3 certainly agree on default blades, most of my stuff that has come with a blade that blade has never even had the gum or plastic removed from it. Oh one last question, with regards to the MFT, it looks collapsible and what I can see on Amazon it says it is. Is it easily collapsible? That alone would possibly sway me as I don't have the room for another dedicated table but if I could fold it up when not in use and tuck it in a corner. I could see that whole system being great for cutting down sheet goods. Quote
STL Woodguy Posted October 10, 2012 Report Posted October 10, 2012 I'm not an MFT owner, so I can't completely comment on it. It's a tricky sell on me because it is a lot of money for a table (with an MDF top, at that), and I'd rather put money into a solid wood workbench right now. On the other hand, I might be doing some work for someone off-site sometime in the next couple of months which will involve nearly every Festool in my collection, I won't have my table saw there, and I can't deny how handy an MFT would be. Some thoughts/opinions on what I do know of it based on my exposure: yes, it is collapsable and portable (as long as you can carry 50-60lbs), that's the major selling point for it. I'm not so sure it's so great for cutting big sheets of plywood down (smaller pieces / crosscuts are fine). In the absence of an MFT and you just want to rip sheets down, I'd just throw some sacrificial boards and/or styrofoam underneath the piece and cut it on the ground. One thing that should be noted about the TS55: the track that comes with it is only barely good for crosscutting. However, your Festool dealer should be able to let you swap the track out for a longer one and cover the difference. I chose to keep the TS55's 55" track, bought the 75" track, and have the best of both worlds (the two can be joined if needed). Quote
pghmyn Posted October 11, 2012 Author Report Posted October 11, 2012 I just thought about something that might actually sway me to buy the TS 55 now. I do a few laminate hardwood floors every now and then, and it is a PAIN to do a rip cut on one of those planks. I can only imagine how nice it would be to have the TS 55 for that, and coupled with a CT Midi. I would love it. The dust from laminate hardwood floor is so fine and gets everywhere. If I can eliminate that at the source, even better. EDIT: If I buy the TS 55, how effective will my current shop vac be at dust extraction? I will eventually invest in the Festool CT dust extractor, but it's not on the top of the list at the moment. I have a few months until I have to put down some hardwood floors Quote
Reiska Posted October 12, 2012 Report Posted October 12, 2012 I'll try to answer some of your question as a owner of a MFT, TS55 & CTL26. First off the MFT3 with the optional cross braces makes a pretty sturdy portable and foldable workbench with a plethora of clamping possibilities. I only have a shed to store my tools in with the lawnmower and set-up in the backyard every time I make dust and it's a treat. Its good in the default configuration, but the optional cross braces make the table just so much less wobbly. If you need to rip full sheets of ply you need two tables or put it on the ground like some have already suggested. Or get a Walko work bench for that ;-) You can use a TS-saw off the track in a pinch, but since you can not lock the blade down its a bit too fiddly to my taste. Had to do this a few times when cutting non-dimensioned 2x4 with my TS55 and it didn't quite reach through while on the track. A nice use case for a plunge saw is if you need to make sink holes in the middle of a table top - just mark the hole and plunge. I would not use my TS55 without dust extraction since that was the point in getting one, but it can be used without if required. I've used my Festools with a Kärcher vac before I bought my CTL26 with reasonable results, but I haven't experienced a single blockage with my CT vac vs. the Kärcher was totally blocked multiple times a day - especially when running my router on it. I do sometimes wish I had a 75 for the added cut depth, but at the same time I must admit that the 55 is a perfect size to handle whereas the 75 is quite bulky in comparison. 99% of the time the 55 is perfect for my hobby use and that 1% I can pull out a hand saw. As for clamping the rails down I would say that the rails stay nicely put as long as they have material to lie on with a straight surface. I only clamp them when the cut must be totally precise or if the rail is not supported over the whole lenght or width of it (like when ripping 2x4" boards with just a side support scrap piece). When I bought the MFT table it totally transformed the ease of use of the TS-saw for me so I would highly suggest that since you have to make budgetary decisions to see if you can get a deal on a TS55 + MFT/3 combo and try rolling for now with your existing vac (I presume it has either a 27mm or 36mm hose connector or a converter to attach it to the saw). Then add a CTx6 vac when you have the money. When I'm not doing anything totally exact I can't be bothered to pull out my mitre saw even for cutting boards (the odd cut that is) if I have my MFT and TS out. I get a clean cut and angles with the MFT's protractor and tye guide rail. A note regarding the Dominoes though: they will not work without active dust collection at all since the morticing happens pretty much in an enclosed space. The DF500 has a 27mm dust port - don't have an XL so don't know its dimensions. Quote
STL Woodguy Posted October 12, 2012 Report Posted October 12, 2012 If I buy the TS 55, how effective will my current shop vac be at dust extraction? I will eventually invest in the Festool CT dust extractor, but it's not on the top of the list at the moment. I have a few months until I have to put down some hardwood floors I've never had much luck getting my Shop-Vac to hook to well, literally anything without rigging it (maybe it's just the hose that came with it), but if your hose will attach to the dust port on the TS55 or have a way of doing so, then I don't see why it wouldn't work. Depending on the size, the Shop-Vac hose may be more cumbersome to deal with during operations. Collection / air flow may or may not be optimal compared to dust collectors designed for power tools (like the CT or Fein) and may be impacted by the way you hook it up, but it'd be far, far better than nothing. This thread might help: http://festoolownersgroup.com/festool-tools-accessories/anyone-know-of-a-good-way-to-hook-up-a-ts-55-to-a-regular-wet-dry-vac/ Quote
pghmyn Posted October 12, 2012 Author Report Posted October 12, 2012 I've never had much luck getting my Shop-Vac to hook to well, literally anything without rigging it (maybe it's just the hose that came with it), but if your hose will attach to the dust port on the TS55 or have a way of doing so, then I don't see why it wouldn't work. Depending on the size, the Shop-Vac hose may be more cumbersome to deal with during operations. Collection / air flow may or may not be optimal compared to dust collectors designed for power tools (like the CT or Fein) and may be impacted by the way you hook it up, but it'd be far, far better than nothing. This thread might help: http://festoolowners...ar-wet-dry-vac/ I have an old vacuum hose that is very limber and about 10 feet long. I have an adapter that comes close (with the addition of some duct tape) to attaching right to my actual shop vacuum hose. I think it might fit right to the TS 55 without any other adapters, but if I have to use a little more duct tape or spring clamps, it would be well worth it. EDIT: I also had a question for current TS 55/75 owners. When you have a board on a sacrificial surface like the MFT, does it cut what is underneath as well? If so, can I set how deep the tool plunges? Quote
Reiska Posted October 12, 2012 Report Posted October 12, 2012 Yes, the MFT top is sacrificial and reversible once one side is cut enough. I baby mine so I only have a single cutline where the blade always lands when cross cutting on the rail. When I rip lenghtwise I throw some scraps underneath. You can adjust the plunge limiter in 1mm steps. A typical newbie error is to cut something thick and then forget to readjust the stopper before plunging on something thinner. Been there done that and plunged the blade thru the table. Works just like new regardless ;-) Quote
STL Woodguy Posted October 12, 2012 Report Posted October 12, 2012 A neat timesaving trick on setting the plunge depth (which I'm not sure is in the manual or not) without constant fiddling is to manually plunge the saw (saw off) to the depth you need, then slide the depth stop down and it will stop right where you have plunged. If you're doing this off the track, don't forget to take the height of the track in account when doing so. Quote
pghmyn Posted October 12, 2012 Author Report Posted October 12, 2012 I just stopped at the local Rockler store here in MIlwaukee, and I almost left with the TS 55. I am "house-sitting" for a family member, and I didn't want to have the tool here. Besides, I just signed up for the Chase freedom credit card, and I am waiting for that to come so I can use it on the saw. If I spend $500 in the first 3 months, I get $100 cash back. So it's like getting $100 off the saw, in my opinion. Quote
STL Woodguy Posted October 12, 2012 Report Posted October 12, 2012 I've been answering questions about the TS55 a lot - both on here and in person - so I figure now is a good time to post my review on it that I've had sitting by. It goes into more detail and highlights the pros (and cons), hope it's helpful for any further questions: 1 Quote
pghmyn Posted October 12, 2012 Author Report Posted October 12, 2012 I've been answering questions about the TS55 a lot - both on here and in person - so I figure now is a good time to post my review on it that I've had sitting by. It goes into more detail and highlights the pros (and cons), hope it's helpful for any further questions: I am too cheap to buy a MFT, but I am not too cheap to buy the TS 55. That review was amazing, and basically helped me further solidify my choice on buying this saw. I am going to buy the saw to break down sheet goods at first, but I am going to eventually buy an additional 32" track and construct a "MFT-ish" table just to clamp smaller goods down for cross cuts. Not that I NEED the MFT, but I would like to have something similar to it for occasional use. Quote
pghmyn Posted October 18, 2012 Author Report Posted October 18, 2012 Well, good news Just bought the TS 55 tonight, and briefly toyed around with it tonight. I have a few more things to test and learn about it, but I should be cutting up my sheet of 4x8 Maple plywood tomorrow. I tested the saw on some really poor quality plywood that I had laying around, and there were absolutely no splinters even without the splinter guard installed. This is one top quality saw. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.