JimB1 Posted October 23, 2012 Report Posted October 23, 2012 Anyone used any of these: I have some card scrapers now and am thinking about the Veritas variable burnisher for sharpening scrapers. Using a screwdriver shaft now and it works but is a pain : http://www.leevalley.com/US/wood/page.aspx?p=32633&cat=1,310,41070&ap=1 and the Veritas scraper holder to help with heat when scraping: http://www.leevalley.com/US/wood/page.aspx?cat=1,310&p=32669 and finally the Scraper jointer/edger to prep the scraper for burnishing: http://www.leevalley.com/US/wood/page.aspx?cat=1,310&p=61448 Has anyone used any of these? Are they worth it? Any help would be appreciated... Thanks -Jim Quote
Mister Pants Posted October 23, 2012 Report Posted October 23, 2012 I've used the variable burnisher. It works ok, but to be honest, I've moved away from it to a regular oval burnisher. I find it just as easy to use and I can put more muscle power into it if I feel the need to. For heat on the burnisher I just use some tape, that way I can keep changing the bend as I need to. I think you're locked into a specific bend with the scraper holder (or rather need to stop, adjust the bow etc, where I can just do it on the fly freehand). Quote
CessnaPilotBarry Posted October 23, 2012 Report Posted October 23, 2012 I use work gloves, Mechanix, cheapo leather, etc... whatever's handy, for the heat. As Kevin mentions, sometimes, you need to change the bend angle. Mike Pekovich has an excellent video on scraper prep, available free... on the technique I was taught a long time ago. He demonstrates how to use a wooden block, instead of purchased device, to prepare scraper faces and edges. I've had good luck with the Veritas burnisher, but I know folks who use hard chromed socket extensions and old valve stems. Don't forget a light touch of oil on the burnisher. Quote
Barron Posted October 25, 2012 Report Posted October 25, 2012 I like the one I purchased from Glenn-Drake. It is also a file, and works very well. Quote
dtrust Posted October 26, 2012 Report Posted October 26, 2012 I have the scraper holder, but rarely use it. Not that it doesn't work, as it allows you to put much more pressure on the scraper. It's just that for me, it's too ....confining I guess is the word. Too hard to adjust on the fly. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.