John's Woodshop Posted November 14, 2012 Report Posted November 14, 2012 Move to the Critique Room - Sorry...... Quote
John's Woodshop Posted November 14, 2012 Author Report Posted November 14, 2012 Hi All, My daughter asked for a hope chest for her 16th Birthday that is coming up in December. I can't believe I managed to get er done. The wood is some Ambrosia Maple that I got from an ad on another woodworking site a few years back for 40 cents a board foot. I started with this...... And ended up with this..... The Lid...... The finish began with a wiping down of the case and lid with mineral spirits, and after that dried, one coat of Zar #117 Honey Maple Oil Based Stain, and then 5 coats of Minwax Wipe on Poly (Clear Gloss). My Daughter has not seen the finished Hope Chest, but she was involved in all the design decisions, and she picked out the finish. She picked the boards for each panel. This was a lot of fun to build as it was my first attempt at a dovetailed case. Thanks for looking! John Quote
Boatworks Today Posted November 14, 2012 Report Posted November 14, 2012 Very nice! She's going to love it :-) Quote
Chris H Posted November 14, 2012 Report Posted November 14, 2012 $0.40 /bf for Ambrosia Maple....grr (jealous). That is a beautiful chest, the dovetails look great! How did you finish the inside? Do you plan to line it with A.cedar or leave it maple? Quote
John's Woodshop Posted November 14, 2012 Author Report Posted November 14, 2012 How did you finish the inside? Do you plan to line it with A.cedar or leave it maple? I didn't finish it, and I plan to just leave it maple. Thanks! John Quote
pghmyn Posted November 15, 2012 Report Posted November 15, 2012 I am in love with the lid. I wasn't too fond of the grain pattern in the first picture, but the lid is awesome! Quote
Guillaume Breton Posted November 15, 2012 Report Posted November 15, 2012 I didn't finish it, and I plan to just leave it maple. Thanks! John reaaaaaally like it ! you might as well just put 1 coat of finish in the inside, something that wont smell too bad, just to seal the wood and equalize the exchange of moisture on both faces. did you do all these dovetails by hand ? tell me your secret ! nice job ! Quote
John's Woodshop Posted November 15, 2012 Author Report Posted November 15, 2012 reaaaaaally like it ! you might as well just put 1 coat of finish in the inside, something that wont smell too bad, just to seal the wood and equalize the exchange of moisture on both faces. did you do all these dovetails by hand ? tell me your secret ! nice job ! Thanks for the suggestion about finish on the inside of the case. I used a dovetail jig from peachtree woodworking to cut the dovetails. Thanks again John Quote
Mister Pants Posted November 15, 2012 Report Posted November 15, 2012 I am in love with the lid. So am I, that and the dovetail work. It's a stunning piece. Quote
Ironman50 Posted November 15, 2012 Report Posted November 15, 2012 Wow. Only the finest I have ever seen. Quote
John's Woodshop Posted November 15, 2012 Author Report Posted November 15, 2012 Thanks guys for the encouragement! John Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.