Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Help with pricing kitchen cabinets.

Featured Replies

Hi there.

I recently opened a shop where I am going to spray kitchen cabinets and furniture for local manufactures and carpenters.

I have a good knowledge of products and how to do it. Unfortunately I don't know how to price anything. and that scares me.

hoping to get some help on how to price these items

MDF kitchen cabinet door (one side)

Maple etc..kitchen cabinet Doors (stain and paint one side)

Kick toe 4 1/2

Light Valance 2 ½

Crown Molding 3”

Hood 30”

Fillers

Corbels 12”

Finished panels

Columns 3” wide shaker style and 9 ft tall. (the front and one side to be sprayed)

striping and staining kitchen doors (one side)

Refinishing Kitchen doors (one side)

stripping and staining 7 foot oak doors (one side)

If any one can help me I would really appreciate it.

god bless

Anthony

Ah, yes. The age old question. Andy you can only charge what the market will bear, and as your own boss, you will find that you have to ignore a lot of the hours you spend working that you had not anticipated. It will always take you a lot longer than you thought, and materials will always be at least a little more than you figured. What I try to do is figure out how long it should take and what my materials should cost. Set an hourly rate for yourself, plus an overhead cost burden per hour to cover all the shop expenses, add your materials (marked up and with a waste factor) and then see what the total looks like. If you think the market will bear it, mark it up some more. I hope God blesses you with a successful business.

+1 on the waste factor! Do not forget to budget for tape, filters, sandpaper, thinners , sales taxes!

Or you could be evil and sneaky, pose as a contractor , call and try to get a quote on your finishing project from an established shop in a nearby town.

Finishing is sold by the square foot or linear foot for trim work. If your familiar with the products you know how much of each it take to complete a job. If not then your not ready and need to become familiar with your products. Finishing operations are broken down by the square foot or linear foot.

Each operation is billed separately then combined so as not to overwhelm the customer with babble. If a cab shop were to sublet their finishing operation for say a set of cabinets it would go something like this in terms of square feet.

Finish sanding to 220 (cab shops usually stop at 120 for subletting) sq ft x $ per foot

Equalizing sq ft x $ per foot

Toning sq ft x $ per foot

Staining sq ft x $ per foot

Sealing sq ft x $ per foot

Top coat sq ft x $ per foot x coats

Omitted steps would of course be omitted from your pricing. Pricing changes by the material used. Of course cheap precat will cost less than expensive poly. Trim work is linear foot because there is lots of material waste no matter how careful you are.

Since your going into this as a business I would assume you have a spray booth. Booth time for topcoats is important. Lacquer may be ready to leave the booth in 30 minutes but poly is going to be hours. The time the product stays in the booth takes time away from the next putting your production further behind. It also cost you money to power the booth for hours at a time keeping the temp up and exhaust running in maintenance mode. Of course this assumes you dont have an oven.

Don

Why don't you have a meeting with your new potential customers. Tell them your the new shop on the block and hungry for business and will do what it takes to earn your business. Ask what they are paying now and how they pay and see if you can better the price or match the price they pay now, (for a deal to be good, it has to be good for both parites) Tell them your not sure how the pricing thing works. If you are sincere, perhaps they will take you under their wing and bring you along. Then go home and do your homework.

It may be expensive in the begining and cost you a few buck's...but if the work keeps coming...you will learn and get better.

Hope this helps.

This won't really help you since your clients will be cabinet shops, but I thought it would be useful to someone.

When I started learning the business side of my cabinet shop, I asked my dad how he figures prices for cabinets.

He said "First, when I go to their house to measure, I look to see what kind of car they drive." Ha ha

Although I really don't use that to determine prices, I do look to see what kind of car they drive.

I do believe the other guys have good advice for you.

  • 2 months later...

i would  recommend buying that will help you enormously (at least they helped me) with your business.

 

First one is : "Working at Woodworking " by Jim Toplin

 

and also     "The woodworkers guide to pricing your work" by Dan Ramsey

 

Both books have very good information about how to set pricing standards for your work and how to set up and maintain the business.

 

I actually bought these books about 2 years after i started my business and they really drew my attention to some of the things i was doing wrong.

This won't really help you since your clients will be cabinet shops, but I thought it would be useful to someone.

When I started learning the business side of my cabinet shop, I asked my dad how he figures prices for cabinets.

He said "First, when I go to their house to measure, I look to see what kind of car they drive." Ha ha

Although I really don't use that to determine prices, I do look to see what kind of car they drive.

I do believe the other guys have good advice for you.

So do you charge more when you see the new benz in the driveway. :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.