Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

One more reason to get me a bandsaw

Featured Replies

I have property in Colorado with 10 acres of beautiful trees. Sometimes there are nice pieces of standing dead lumber I could use .... The question was how to mill it

This gave me an idea.

That's very nice... I like this one a bit better..

  • Author

No doubt ... I was just trying to justify my first bandsaw

That's very nice... I like this one a bit better..

I've been useing a home made sled for my 14" Grizz band saw with riser block, and have sliced up lots of found wood on my home made sled does not have the handy dandy clamps that your video sled has I just use a couple of wedges that have a couple nails that I hammered into them I think I used 8d's I cut the head of the nails off than sharpened the stubs with a file, also I've mounted a cleat on the end to push the log through the cut. I set the log on the sled decide where I want the log sliced, slide the wedge over to the the log than press the wedge til the nail stub bites into the sled, this stabilizes the log long enough to make a slice through the log now you have one flat face. Next I remove the wedges from the sled I lay the flat face on the sled position the log where I want the 90% slice once I've completed this cut I take the sled off the bandsaw, than just use my tall fence to slice up the rest of the log it just cost me a scrap of plywood.

I think with today's high speed kiln drying that plenty of justification to own a nice bandsaw.

Don

I'm just currious Don, is the high speed kiln drying causing the wood to be more reactionary is that what you saying? Or is it something else?

problem i have with resawing your own boards on band saw is that it dulls the blade too fast. its great if you want to resaw a particular unique project but to do do a large quanity wood your looking for trouble. i find the band saw more usefull for cuting up bowl blanks, taking a thick board and cuting it in half, cuting carving forms, basicly fire wood size wood.

if you want to cut up large trees do it right and get a larger saw like the sawmill that bobby posted they even make ones that you chainsaw can mount too.

No doubt ... I was just trying to justify my first bandsaw

No worries.. I was just bein' "Ornery"...

Go get yourself a bandsaw.. everybody needs a bandsaw.... sooner or later...

I mean what if there is a bandsaw necessary emergency and you don't have one !?!?!?!?

I'm just currious Don, is the high speed kiln drying causing the wood to be more reactionary is that what you saying? Or is it something else?

Today kiln operators rush the process. We used to grab a nice 1x8 8 ft long face joint, edge joint and rip to usable strips for things Iike face frames and doors. Now days 90% of the time you will see your saw kerf close up on you as you're cutting making your machine work a waste of time. If you've already planed the piece you're screwed if you didn't leave the extra room. With this being so common the bandsaw is indispensable to do initial break down making large jointers not so necessary. Breaking down on the band saw relieves the lumber. The bandsaw is safer and faster than the tablesaw. Safer because the wood isn't going to grab the saw blade. The bandsaw should also cut faster provided it has enough power and the right blade. You can relieve with a table saw but its unsafe and involves wasted steps and with every wasted step there is wasted material. If you not relieving your lumber, you should be and I'll put money on the fact that your joinery and overall project will improve.

Don

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.