Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Repairing Waterlox problems

Featured Replies

Hello all,

A few months ago, I installed butcher block countertops (beech from Ikea) in my kitchen. I chose Waterlox Original to finish them based on some Internet research and advice from a couple people at Woodcraft. I'm really happy with that product, but as it was my first time using a varnish, of course there are a couple (user generated) problems:

1. A small section of orange peel-ish texture in the top coat, I assume due to an earlier coat not drying fully before the next one went on.

2. A deep scratch from a screw in the rubber foot of my knife block. I believe this scratch may have gone through to the bare wood.

I have heard that Waterlox is fairly forgiving; I'm hoping that's true. I expect the scratch will have to be sanded to the bare wood; if so, can I just sand down the area around the scratch and feather the new coats back in? Or will the new finish never quite match the old?

Thanks in advance for any help you can offer with these issues.

Ryan

Use a cabinet scraper on the orange peel and scratch. Then feather out with sandpaper. Wipe on thin coats to build finish back up. Use very fine sandpaper over the entire top before the final coat.

Takes pics of before and after. I'm a Waterlox user and think the above advice will give you good results.

  • Author

Thanks, everyone, I'll give it a shot. FYI, flooring guys really, really hate scraping:) I'll post pics when it's finished.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.