Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

layering stain coats

Featured Replies

I am using oil based stain and when I apply a second coat it is reactivating the first coat. Can I layer seal coat (50/50 alcohol) inbetween stain layers? Do I need to just allow more drying time? Is there an issue with using the seal coat on the bare wood and the again after the stain before the top coat?

atc, are you saying you sealed the bare wood before applying the stain?

I have the same Q as TR, but also how long are you letting the stain dry before over-coating?  Should be 24hrs under normal conditions (65 degrees or warmer)..  How are you applying the stain?  Rarely do I find the need to double coat..  Maybe check this out; could answer a few questions (specifically towards the end).... :rolleyes:

 

Barrier coats or shellac are done between stains in the pro world all the time.  A typical schedule to create a very complex finish, as taught to me by a Mohawk rep, might be:

 

- dye

- Seal Coat shellac

- pigment stain

- shellac

- a different pigment stain

- shellac

- optional glaze

- first sprayed clear or tinted coat

- ...

 

This is done with fast drying pigment stains, like Behlen or Mohawk.  Products like Minwax contain too much oil and don't dry.  This schedule can be done with only 20-45 minutes between layers.

 

Fast dry stains are wiped or sprayed on, then evened out by dry brushing with the grain using a china bristle brush.  The stain dries as it's dry brushed.  If a coat of pigment stain gets messed up, it can be wiped off with mineral spirits without disturbing anything under the latest coat of shellac.  The shellac is like an undo button for finishers.

In my limited staining experience, i have not found a second coat very beneficial. To be fair though, I typically work with woods the colour I wish to have. I try to avoid staining if possible.

I am not counting a seal coat in my above statement, just the pigment.

  • Author

I sealed the bare maple with a 50/50 of den alcohol and SealCoat. This was for blotch control. I apply the first coat of stain but want it a little dark, os after 24 hrs applies another. The first coat started comig off. It is winter and cold/dry so maybe it nneds mre time? I dont want to many layers and ruin alll the detail of the wood I just want the blotching hidden and the color dark. Should not have choosen maple but too late for that.

You need to know what your working with. "Stain" has become a generic term. Some are stains and some are dyes. Minwax is bad about selling dye labeled as stain. How you work it changes depending on the product.

Don

  • Author

I am using OLd Masters Wiping stain. I believe it is an oil based pigment stain

  • Author

I know using a pe-stain conditioner there is a time constraint window. Does this contraint exist when using Bulls Eyes SealCoat cut 50/50 with alcohol? for some reason my stain samples arelooking different today than a few days ago. I sealed te board a few days ago

  • 2 months later...

I don't know about your experiences guys but when I try to restain wood it makes it chirp. My friend recommended that I just use a wood pre-conditioner instead of two coats of stain. So far, I love the effect of it on my products. I have to agree with Don, some dyes are labeled as stains so be careful with them. A.S.

You need to let the stain dry a few days if your pulling up too much of the first coat. You will pull some of the first coat up, but that happens. Just get the stain on and try not to over work it. Your second or third coats of stain are to help even out the color.

 

-Ace-

If you just want to make it darker and have access to spray equipment you can apply a toner with your stain over a washcoat.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.