Recommended Posts

Posted

i'd like to get either a #3 or #4 bench plane.  i've looked at the wood river line and if i buy new, this is probably the direction i'll go.  however, i see tons of old planes on ebay and hear about guys buying them and restoring them.  what do i look for in an old stanley if i go this route?  

Posted

There's a lot out on the web on setting up a hand plane. Chris Schwarz recently put out a DVD on this subject. But probably the best option is to see if there is someone around you that can show you how to do this in person. As good as the internet and videos are, this is something that is best seen in person.

 

You don't say where you're located in your profile, but if you tell us where you are, maybe someone on the forum that is close by would be willing to help. You can also see if there is a woodworking club nearby. Every woodworking club has their hand plane guru.

Posted

Thanks for the reply, Wilbur.  I'm in the charleston WV area.  there is a woodworking club near me that i've been thinking of joining.  i went to a meeting a while back, but the pace was a little slow.  im considering giving it another shake.  I'm to the point yet of the restoration, i just need to know what to look for when scoring a good plane.  

Posted

I think Schwarz also put some videos on the Lost Art Press blog about cleaning up an old handplane.

 

My personal experience - I bought a pre-WW2 Stanley off eBay and have had good luck with it. The main things are checking pictures for extensive rust/pitting and obvious signed of damage. Look for a tool that seems like it's been at least vaguely maintained. Assume you'll be cleaning it, sharping the blade and oiling the adjusters at a minimum. Flattening a sole isn too difficult, but can be time consuming. I would avoid anything with obvious damage or missing pieces. Unless it's a labor of love, there's no reason to start replacing bits. The only exception would be the blade - you can buy replacements in many places for a reasonable cost (if you get a good enough deal on the plane itself).

Posted

Hi Nick,

 

I have gone through this process just recently and have ended up with #4 #5 and #6 vintage planes for my own private tool set. First off I made a mistake. I had not used ebay for a while and got bid happy. Before I knew it I had 3 #4,( this one this one and this one ) 2 #5 ( this one and this one ) and this #6 . The best mistake I ever made because I learnt so much about the planes and how the quality deteriorates as they become newer. 

I ended up keeping this #6 #5 #4 . On the face of it they seem the worst looking but they are easily the best performers. the #6 and #4 are great. They have the old style frog that is also the same, as far as I know, as the premium offerings from Lie-Nielsen/Clifton and the like. All the adjusters are also really sweet with nicely made parts that operate well, something you would pay allot for from premium suppliers. As you can see I have not spent much for the 3 planes I kept (the others have all been sold for similar amount to what I purchased them for). I have learned some basic facts during this process which are 

 

Superficial surface rust and tatty looking handles should not put you off.

Don't buy much newer then late 1950's 

Ask for a photo of the frog a look to get them with the old style.

Get a picture of the mouth and ask if there is any damage.

Don't bother with incomplete items unless you really just enjoy restoring tools.

 

Most of this advice is based on the Record brand but lets face it, they are just English copies of the original US made Stanley design.

 

Let us know how you get on with you purchase and share some pictures

 

That's about it. Nothing to fear, and you would save so much when compared to premium brands. I also have some opinions on chip breakers, blades and tuning that I want to get off my chest but that will have to wait for another day as I don't want to go off half cocked.  :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 55 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined