Recommended Posts

Posted

Id like to buy my son in law an old RAS. Everything on craigs list now days seems to be craftsman and a few older dewalts. Anyone have a good one with a model nomber that I can look for. The bigger the better. Ive read that some were junk but others were ok.

Don

Posted

When it comes to RAS, I have always heard to stay away from the craftsman saws.  The dewalts on the other hand set the standard for RASes, and are a good machine to get if you come across one.

Posted

Really want 24" crosscut and induction motor. All this thing is going to be used for is crosscutting ply panels 24" and smaller. He already has a Kapex. I'd like to stay under $500. If we're for me I'd buy a real saw but no matter how good of a kid he is there is a limit. I'm going to go look at a 40" Maggie for $700. If its what the guy claims ill jump on it.

Don

Posted

What is the benefit of an RAS vs a track saw?  TS just seems more versitile, with nearly unlimited length.  I am sure I am missing a key function, but I just don't see what it is.

Posted

What is the benefit of an RAS vs a track saw?  TS just seems more versitile, with nearly unlimited length.  I am sure I am missing a key function, but I just don't see what it is.

RAS and track saw are two different tools. A track saw really has no use in a production cabinet shop. Some guys rip full length on the table saw but are not comfortable cross cutting 8/10/12 ft panels on the tablesaw so that is were the RAS makes it easy and very fast. Its all about speed and making a living.

I personally do it all on the tablesaw but have done it for alot of years. The worse off my body gets the more I turn to the panel saw for crosscuts but Im not buying him a panel saw or letting him use mine. :)

The RAS is however dangerous if you dont keep your mind on your work. The only accident that I have ever had that sent me to ER was wacking off my finger on a 22" maggi RAS.

Don

  • Like 1
Posted

My father has an older craftsman. I can say that it scares me far more than any other tool I've used. I only played with it a few times but since you're always making a climbing cut it has a tendency to come at you if you know what I mean. I contemplate bringing it to my shop now and then for cutting cabinet pieces. I think space more than anything has kept me from giving it a try.

Posted

I've also heard the old Dewalts were the ones to gravitate to.  I know people always say to stay away from the RAS because of safety, but there is something about them that makes me want one.  I see tons of them on Craigslist all the time and one of these days I'll probably buy one to try.

 

PB, I definitely want to hear how you make out with this and whether your son in law likes it. 

Posted

Years ago, I had an Craftsman RAS.
Possibly one of the worst investments I ever made.
 

That thing would not stayed tuned for anything. I remember following the tuning instructions in the owner's manual. Then it seemed like I'd make one cut and the very next cut it would be out of tune again. My memory may have soured me over the years so it may have been more than just one cut. But it certainly seemed like I was always tuning that darn saw. Far more trouble than it was worth. I ended up giving it away.


The guy I gave it to ended up giving it away for the same reason. I'm sure my old RAS has been resold on Craigslist 100 times.

 

It was a cool looking tool and it seemed like it worked until you checked the piece you just cut for a 90 degree angle and couldn't find one.

Posted

I've also heard the old Dewalts were the ones to gravitate to.  I know people always say to stay away from the RAS because of safety, but there is something about them that makes me want one.  I see tons of them on Craigslist all the time and one of these days I'll probably buy one to try.

 

PB, I definitely want to hear how you make out with this and whether your son in law likes it. 

We bought the Maggi. Its in a different league than the little craftsmans and dewalts. The motor needs some work but after I have the motor rebuilt I think it will be a great addition. Has a 40" crosscut with 3hp 220v induction motor.

Don

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 35 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined