nikbrown Posted March 7, 2013 Report Posted March 7, 2013 I have some home depot roller stands and the handles have broken... They were pretty light duty anyway. What are some decent weight roller stands? I want something that can handle some nice heavy 12/4 stock. Quote
Freddie Posted March 7, 2013 Report Posted March 7, 2013 I just picked up the PM5080 2 weeks ago to use as an out feed roller. It says its rated for 132 lbs. I haven't had any issues with it whatsoever. Think it was 25 bucks too, not bad. http://portamate.com/pm5082_pedestal_roller.html Quote
wdwerker Posted March 7, 2013 Report Posted March 7, 2013 I picked up a cheap one at Harbor Freight and have been quite happy so far. It has handled 8/4 stock for hours on the outfeed from my drum sander. The Depot tilting flip top outfeed stand is good for catching boards that dip down below a regular roller stand. Quote
wdwerker Posted March 7, 2013 Report Posted March 7, 2013 Wood magazine tip shows how to add a tilt top to a regular roller stand. I just googled " tilt top outfeed stand ". Quote
nikbrown Posted March 7, 2013 Author Report Posted March 7, 2013 Cool I'll look into the PM5080. thanks. The HD roller stands I have are not the fliptop ones. Just some cheap ones they used to sell for like $19 with plastic handles. I may give the fliptop ones a shot, I have a HD gift card left from Chirstmas. Quote
CessnaPilotBarry Posted March 7, 2013 Report Posted March 7, 2013 +1 on the Rigid flip top, non-roller stand. It works surprisingly well, at a reasonable price, and doubles as a fixed support. When it comes to rollers, I prefer balls over tubes. (easy, there! ) The tube roller stands I own have the habit of steering stock to one side or the other, if not perfectly aligned. Roller balls, such as those on my Ezee-Feed infeed support, allow the material to easily track in any direction. The Ezee-Feed isn't cheap, but I'd buy it again in a heartbeat. http://www.ezee-feed.com/ Quote
Dave H Posted March 7, 2013 Report Posted March 7, 2013 +1 on the flip top I love mine hardly ever use my other roller stands. I use a short board across the feet of my stands and, set a tube bag of sand on the board I keep some tube bags of sand around they come in handy for alot of tasks including glue ups. Quote
Vic Posted March 7, 2013 Report Posted March 7, 2013 Agree in the flip top. But, wax them and add ballast. Friction can tip them over without added stability. Quote
Dave's Not Here Posted March 7, 2013 Report Posted March 7, 2013 I hate roller stands! You have to spend way too much time making sure they are lined up just so when using with a TS. I gave away all that I had a long time ago and now use the Ridgid Flip-Top exclusively. They are a little on the spendy side but I think they're well worth it. Quote
TRBaker Posted March 8, 2013 Report Posted March 8, 2013 Barry, I checked out that ez-feed and that looks fantastic. That site goes in my file for future purchases. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.