Recommended Posts

Posted

I have two questions pertaining to the no 80 scraper. First, burnish or not? I have read things saying both ways. I just sarpened mine and burnished a hook slightly less than 45 degrees that I honed at. Also how wide a shaving should it be making? Right now im only taking about a 3/4'' wide shaving, and that with not a lot of pressure on the rear thumbscrew. Is this correct or should I be doing something different. Thanks

Posted

As with a card scraper, a hook will make a #80 cabinet scraper work more aggressively.  The width of shaving depends on the amount of scraper engaged with the wood, or the amount of camber you've applied.  3/4" is a good place to start.

Posted

Thanks for the reply Chris, I sharpened the blade straight across at 45 degrees, then put a slight hook on that. Even with the rear thumb screw only slightly engaged I'm still getting a narrow shaving, is that normal? It seems like a really wide blade to only use a small amount of it's width. Thanks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.