Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Refinish an Oak table

Featured Replies

Hello!

 

It's been about.. oh I don't know about 16-17yrs since I actually did any woodwork and I miss it dearly. Anyway, I have an oak table that I made back in highschool and I recently got it back from my mum's place and she didn't take good care of it. Her dog must of peed on two of the legs at one point and there are a lot of water marks on the top.

 

What I am looking to do is to sand it down and refinish it with a clear coat and have a few questions to make sure I'm on the right track still.

 

Sanding wise, I am looking at getting a 1/4 sheet palm sander as that's what I used to use. Is there a big difference between the square palm sanders and the those random orbital ones?  

 

Think what I need to do is sand it down a bit, use some oak wood filler for some of the gaps between the 3/4" pieces and then finish it with some clear coat. Originally we sprayed lacquer on to it but since a) i dont have a license for that nor a proper space to use it, I would have to use some brush based varnish. What should I look for? 

 

The table top consists of 3/4" oak with a couple strips of purple heart. The legs are also 3/4" oak. 

 

Thanks!

I have 1/4 sheet sander and don't use it at all. I bought it along time ago and after getting a random orbit sander it has only been used for very fine sanding like between coats of Finnish.

For the Finnish I would sand all the lacquer off and go wipe on poly, probably semi gloss or you might need a pore fill if you want gloss

Agreed that an orbital sander kicks a sheet sander's butt and leaves it crying for mommy.  But I'd go one tool further:  Start with an overhand scraper.  It's one of those times when doing a step by hand gives you the best of everything:  Faster, cheaper, cleaner, etc...They're cheap (find them in the paint aisle of any home center), easy to sharpen and you'll find yourself reaching for it more and more.

wood works are really awesome i also like this because it gives a new attraction to home decore. On the other hand it's cheap way to decore your home.

Sand using every grit down to 220. Each grit takes out the scratches of the previous grit.

I would use an exterior grade water based finish. They are very clear, add no amber tint, and have UV blockers to keep your purpleheart from fading to brown. Easy to apply with a foam brush , sand between coats with 320 grit by hand.

Sand using every grit down to 220. Each grit takes out the scratches of the previous grit.

I would use an exterior grade water based finish. They are very clear, add no amber tint, and have UV blockers to keep your purpleheart from fading to brown. Easy to apply with a foam brush , sand between coats with 320 grit by hand.

 

Hey Steve, me thinks this is an erroneous post. Seen this somewhere else. :D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.