Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Removing swirl marks AFTER finishing?

Featured Replies

I just put Good Stuff on as my final finish and saw some isolated swirl marks that were missed! I imagine my only option is going back and sanding them away and then refinishing those sections again. Any tips for doing this in only one section of the wood? Also would it be best to do all this by hand or go back to the Rotex 125?

 

Thanks!

What kind of wood? Any stain or just the finish? Are there any un-seen or unfinished parts on the project? If so you could do a test on that area or on some scrap to see the results of your repair technique.

So if I understand, you rubbed the finish out and you have swirl marks? If that is the case, Make sure your finish has fully cured. Go to an auto body store and buy  3m swirl remover.

  • Author

Thanks for all the feedback everyone. I decided to just go back and sand the whole piece again. This happened because of having the suction set too high on the orbital at the start. I thought I got them all out before using the Good Stuff finish. Also, if any of you use Good Stuff use very, very small amounts as it has a tendency to gum up.

 

Thanks

You had pigtails on your project. They only way to get rid of it would be to sand it all down. Unless of course you want to paint your project and make it opaque. 

 

If you want to make sure you got rid of them all before finishing. Splash on some mineral spirits before finishing. This'll highlight the wood and won't affect finishing afterward. Once it's dry of course. 

Thanks for all the feedback everyone. I decided to just go back and sand the whole piece again. This happened because of having the suction set too high on the orbital at the start. I thought I got them all out before using the Good Stuff finish. Also, if any of you use Good Stuff use very, very small amounts as it has a tendency to gum up.

 

Thanks

 

What is "Good Stuff" and use it in small amounts? :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.