Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

spray finish stand

Featured Replies

i need a stand that i can use for finishing.  i make most small stuff so i need a counter top stand that can hold anything up to bowls down to small pendents.  i want to rotate it that is the easy part just get a lazy susan but what would be a good way to hold the stuff up off a surface for spray finish? 

 

i came across this but it is kind of limiting to iteams with a stand that can be held in clothes pin to larger stuff i need a way to hold my project up on small pints but they have to able to be very close togther. and it has to flexible enought to deal with anumber of sizes of projects that i like to build.

http://www.woodmagazine.com/woodworking-plans/shop-organization/rotating-finishing-table/

 

if you have any good ideas please throw them out there and ill think about how that could help me with my projects future.

Take the upper disc off your lazy susan. Drive nails or screws up through the bottom. You'd probably want a system to ensure the points were aligned. They would be easier to drive than the dowels and could be spaced closer together in a field pattern.

I make nail blocks with my nail gun shooting the same length pins at the same air pressure through plywood blocks. 18 gauge nails will hold the weight of larger projects and 23 gauge micro pins are better for small light weight objects. Longer pins will flex when needed, but 1 1/4 pins through 3/4" ply seem to last the longest without bending too much.

You have to sit the object down gently to avoid leaving nail marks!

  • Author

didnt even think of air gun pins steve  thinking i might do a bunch of those close together in the center for pendents and small carvings ect... and then have more spaced out little farther out for larger projects like a bowls and boxes

Carpet tack strip, arranged in rows, makes good standoffs, if you don't feel like driving nails or screws yourself....

 

My spray table is two ~ 2'x2' plywood squares with iron pipe flanges screwed to them.  The pipes are telescoping, AFAIR, 1-1/2" and 2" iron pipe.  The pipes are removable from the flanges for storage.   I have a long outer pipe for floor standing use, and a short version for tabletop and tall case use.  The internal pipe is ~ 12", and is used in both setups.  It was cheap, fast to make, and works great.  OSB would work fine, and is even cheaper.  I can screw 2x4's to the top board to hold larger items.

I use 3" square hunks of 3/4" hard wood. Drove a 2" wood screw into each block. They have a really sharp point and are strong. Use smaller blocks for smaller projects. Use them like a bench cookie!

 

 

 

-Ace-

Go to goodwill or cheap furniture store an buy yourself a flat seat bar stool that spins. Screw down a piece of plywood to the seat. Take it off you can sit on it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.