Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Restoring an old-ish barometer

Featured Replies

So I've always had an affinity for old scientific type instruments and picked up a barometer at a yard sale, with the intent to make it look nice again. I got it all taken apart today, and I can handle fixing the brass bits and such, but wood is a new medium for me. My question for you experts is:

 

The wood has a light brownish film on parts of it. See the picture linked below. So far, I've tried cleaning with mild cleaners such as murphy's but have had limited luck. Do you have advice on how I might clean it? Or do I need to strip it and start over?

 

CZUeV5K.jpg

 

MouFJGK.jpg

 

Thanks much!

Sean

Hey Sean. Welcome to the forum. Some of the spots look like mildew to me. You might try wiping down with a 50/50 solution of Clorox and water. Let it stand for about ten minutes and then wipe off with clean water. If that doesn't help, then it's probably in the finish. I would try, first of all, to wipe down a spot on the back with a couple different solvents to see if you can determine what the finish is. Shellac reacts to alcohol, and lacquer reacts to lacquer thinner. It could be that all you need to do is a light sanding with 320 grit paper and spray on a compatible finish. 

Well, here's my thoughts..  It looks like mahogany..  I can't tell if it's been stained or if it' the natural aged wood color.  I'd take a close look over the piece to see if there are any inconsistencies in the appearance of the finish.  If there is, then it's probably stained; if not...  well, then it's not :P .. 

 

As a test you can give the surface a light wipe down with a wax to check if the depth of the wood comes back.  If it remains a little cloudy / milky then what you're seeing is in the finish and will need to be stripped and re-done..

 

My guess is that you'll need to strip and refinish to get the look you're looking for..  Not difficult and even with the detail around the display not all that time consuming!  As far as the process you use (if you determine this is the route to go) there are a few options depending on the appearance you're looking for. 

 

Nice find!  Also, welcome to the club :) !!!

  • Author

Cool, thanks for the help! I'm going to try cleaning more tonight and maybe try a wax, then we'll see where I have to go from there. I'll post some pictures as I go.

Thanks!

Sometimes a product called "Howard's Refinisher" works well on small projects like yours. It re-dissolves the surface of the finish and it comes in several colors. It comes in a little rectangular can. Test on the back first!

  • Author

I used the bleach-water method to clean it, and that removed a good portion of the grime, as suggested above. I then figured I'd try some oil and see if that helped, and it seems to have brought back the right look to this wood! I finished cleaning up the brass and glass, then repainted the needles on the barometer and hygrometer. Here's a pic of the completed project.

 

wvY5pnA.jpg

 

Thanks for the help!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.